** Package changed: ubuntu => gvfs (Ubuntu) -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to gvfs in Ubuntu. https://bugs.launchpad.net/bugs/1909102
Title: External SSD device connected through USB deconnect/reconnect every some seconds Status in gvfs package in Ubuntu: New Bug description: I have an SSD device which is my old internal disk that I keep as a data backup. This SSD contains multiple partitions: Windows (reserved partition, data and recovery), Linux (Ext4) and EFI partition. When I plug this device with USB, it is mount and umount about every seconds. Here is my dmesg log: https://pastebin.com/CmuygSBZ From 19712.438747 to 19984.763126, the device was connected to one of my USB3 port and from 19992.696855 to the end, the SSD was connected to another USB3 port. I tried to connect the SSD on another laptop with Ubuntu 20.04 LiveUSB and I reproduce the issue. I tried to connect it on another desktop with Windows 10 and I don't have any issue with the disk. ==== System information ==== pierre@pierre-Inspiron-5567:~$ lsb_release -rd Description: Ubuntu 20.04.1 LTS Release: 20.04 pierre@pierre-Inspiron-5567:~$ sudo smartctl -s on -d sat -a /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-58-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SanDisk X400 2.5 7MM 256GB Serial Number: 164784420492 LU WWN Device Id: 5 001b44 4a67ea088 Firmware Version: X4130012 User Capacity: 256060514304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Dec 21 19:14:33 2020 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF ENABLE/DISABLE COMMANDS SECTION === SMART Enabled. === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 4 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 --- Old_age Always - 7729 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 3602 175 Program_Fail_Count_Chip 0x0032 100 100 --- Old_age Always - 0 176 Erase_Fail_Count_Chip 0x0032 100 100 --- Old_age Always - 0 177 Wear_Leveling_Count 0x0032 100 100 --- Old_age Always - 16 178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 --- Old_age Always - 0 179 Used_Rsvd_Blk_Cnt_Tot 0x0032 100 100 --- Old_age Always - 0 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 100 100 004 Pre-fail Always - 10443 181 Program_Fail_Cnt_Total 0x0032 100 100 --- Old_age Always - 0 182 Erase_Fail_Count_Total 0x0032 100 100 --- Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0 194 Temperature_Celsius 0x0022 075 059 --- Old_age Always - 25 (Min/Max 11/59) 195 Hardware_ECC_Recovered 0x0032 100 100 --- Old_age Always - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 8 230 Unknown_SSD_Attribute 0x0032 100 100 --- Old_age Always - 4754564187219 238 Unknown_Attribute 0x0032 096 100 --- Old_age Always - 15966747 241 Total_LBAs_Written 0x0030 253 253 --- Old_age Offline - 12175914203 242 Total_LBAs_Read 0x0030 253 253 --- Old_age Offline - 11243788406 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 4923 - # 2 Short offline Completed without error 00% 4923 - # 3 Short offline Completed without error 00% 0 - Selective Self-tests/Logging not supported ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: gvfs 1.44.1-1ubuntu1 ProcVersionSignature: Ubuntu 5.4.0-58.64-generic 5.4.73 Uname: Linux 5.4.0-58-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.14 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Wed Dec 23 10:02:09 2020 GvfsMonitorError: This tool has been deprecated, use 'gio mount' instead. See 'gio help mount' for more info. HotplugNewDevices: /dev/sdb HotplugNewMounts: InstallationDate: Installed on 2020-12-20 (2 days ago) InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) SourcePackage: gvfs Symptom: storage Title: Does not detect hotplugged storage device UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/1909102/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
