Package: xserver-xorg-core
Version: 2:1.6.1.901-3
Severity: important
I have observed two regressions since upgrading to 2:1.6.1.901-3,
despite having taken care to rebuild xserver-xorg-video-intel against
current versions of xserver-xorg-dev and x11proto-dri2. (As such, I
believe this report to be distinct from #534475.)
- As a traditionalist, I make heavy use of the "fixed" font, which
started showing up as unreadable horizontal stripes rather than
proper characters. I'm not sure if other fonts were also affected,
as I quickly reverted to -2 and the corresponding (unrebuilt)
-video-intel. (I have tried to ensure that the data dump below
corresponds to my brief run of -3, though.)
- While comparing logs of -2 vs. -3 (diff included below), with
everything else held the same, I observed that only -2 was able to
make use of DRI2. That's not such a big deal to me, as pretty much
the only GL apps I run are xscreensaver hacks ;-), but seems worth
noting as well.
--- /var/log/Xorg.0.log-2 2009-06-26 20:39:12.000000000 -0400
+++ /var/log/Xorg.0.log-3 2009-06-26 20:32:29.000000000 -0400
@@ -10,16 +10,16 @@
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
-Build Operating System: Linux 2.6.26-1-vserver-amd64 x86_64 Debian
+Build Operating System: Linux 2.6.30-dsa-amd64 x86_64 Debian
Current Operating System: Linux tux64 2.6.30-1-amd64 #1 SMP Sun Jun 14
15:00:29 UTC 2009 x86_64
-Build Date: 14 May 2009 04:42:17PM
-xorg-server 2:1.6.1.901-2 (bui...@excelsior.roeckx.be)
+Build Date: 23 June 2009 06:28:59PM
+xorg-server 2:1.6.1.901-3 (buildd@)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
-(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 26 20:38:32 2009
+(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 26 20:30:35 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
@@ -44,7 +44,7 @@
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable
AllowEmptyInput.
-(II) Loader magic: 0x7540
+(II) Loader magic: 0x3b40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
@@ -55,7 +55,7 @@
(WW) xf86OpenConsole: setpgid failed: Operation not permitted
(WW) xf86OpenConsole: setsid failed: Operation not permitted
-(--) PCI:*(0...@0:2:0) Intel Corporation 82Q35 Express Integrated Graphics
Controller rev 2, Mem @ 0xfe980000/524288, 0xd0000000/268435456,
0xfe800000/1048576, I/O @ 0x0000dc00/8
+(--) PCI:*(0:0:2:0) 8086:29b2:1043:8276 Intel Corporation 82Q35 Express
Integrated Graphics Controller rev 2, Mem @ 0xfe980000/524288,
0xd0000000/268435456, 0xfe800000/1048576, I/O @ 0x0000dc00/8
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
@@ -108,7 +108,7 @@
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
- compiled for 1.6.1.901, module version = 1.0.0
+ compiled for 1.6.1.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel for the autoconfigured driver
@@ -116,7 +116,7 @@
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
- compiled for 1.6.1, module version = 2.7.1
+ compiled for 1.6.1.901, module version = 2.7.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
@@ -332,7 +332,6 @@
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
-(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: -1 KB
@@ -345,19 +344,12 @@
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
-(II) intel(0): Fixed memory allocation layout:
-(II) intel(0): 0x00000000-0xffffffffffffffff: DRI memory manager (0 kB)
-(II) intel(0): 0x00000000: end of aperture
-(II) intel(0): BO memory allocation layout:
-(II) intel(0): 0x00000000: start of memory manager
-(II) intel(0): 0x01000000-0x017fffff: front buffer (8192 kB) X tiled
-(II) intel(0): 0x00d00000-0x00d09fff: HW cursors (40 kB)
-(II) intel(0): 0x00000000: end of memory manager
+(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
-(II) intel(0): direct rendering: DRI2 Enabled
+(II) intel(0): direct rendering: Failed
(WW) intel(0): Option "PreferredMode" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
@@ -376,11 +368,10 @@
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
-(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
-(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
-(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
-(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
-(II) GLX: Initialized DRI2 GL provider for screen 0
+(II) AIGLX: Screen 0 is not DRI2 capable
+(II) AIGLX: Screen 0 is not DRI capable
+(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
+(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 270
(II) config/hal: Adding input device btnx mouse
(II) LoadModule: "evdev"
@@ -449,704 +440,35 @@
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
-(II) intel(0): EDID for output VGA1
[...]
-(II) Logitech USB-PS/2 Optical Mouse: Device reopened after 1 attempts.
+(II) Logitech USB-PS/2 Optical Mouse: Close
+(II) UnloadModule: "evdev"
+(II) Macintosh mouse button emulation: Close
+(II) UnloadModule: "evdev"
+(II) AT Translated Set 2 keyboard: Close
+(II) UnloadModule: "evdev"
+(II) btnx keyboard: Close
+(II) UnloadModule: "evdev"
+(II) btnx mouse: Close
+(II) UnloadModule: "evdev"
+
+Backtrace:
+0: /usr/bin/X(xorg_backtrace+0x26) [0x4ede76]
+1: /usr/bin/X(xf86SigHandler+0x39) [0x483249]
+2: /lib/libc.so.6 [0x7ff1f98370f0]
+3: /usr/lib/libdrm_intel.so.1 [0x7ff1f76427d9]
+4: /usr/lib/xorg/modules/drivers//intel_drv.so [0x7ff1f7873bf6]
+5: /usr/bin/X [0x502649]
+6: /usr/bin/X [0x530cc3]
+7: /usr/bin/X(main+0x434) [0x433294]
+8: /lib/libc.so.6(__libc_start_main+0xe6) [0x7ff1f98235a6]
+9: /usr/bin/X [0x4326a9]
+
+Fatal server error:
+Caught signal 11. Server aborting
+
+
+Please consult the The X.Org Foundation support
+ at http://wiki.x.org
+ for help.
+Please also check the log file at "/var/log/Xorg.0.log" for additional
information.
+
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 2006-04-13 16:37 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1867152 2009-06-23 14:29 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated
Graphics Controller (rev 02)
/var/lib/x11/xorg.conf.md5sum does not exist.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 1245 2008-05-14 17:47 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "logiclx300"
Option "XkbLayout" "en_US,ru"
Option "XkbVariant" ",phonetic"
Option "XkbOptions"
"grp:win_switch,grp:sclk_toggle,grp_led:scroll,lv3:ralt_switch_multikey"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
Option "XvMC" "on"
EndSection
Section "Monitor"
Identifier "VGA"
Option "PreferredMode" "1280x1024"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "VGA"
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 27659 2009-04-09 19:27 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 80022 2009-06-26 20:39 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-dsa-amd64 x86_64 Debian
Current Operating System: Linux tux64 2.6.30-1-amd64 #1 SMP Sun Jun 14 15:00:29
UTC 2009 x86_64
Build Date: 23 June 2009 06:28:59PM
xorg-server 2:1.6.1.901-3 (buildd@)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 26 20:30:35 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "VGA"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/cyrillic,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable
AllowEmptyInput.
(II) Loader magic: 0x3b40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(WW) xf86OpenConsole: setpgid failed: Operation not permitted
(WW) xf86OpenConsole: setsid failed: Operation not permitted
(--) PCI:*(0:0:2:0) 8086:29b2:1043:8276 Intel Corporation 82Q35 Express
Integrated Graphics Controller rev 2, Mem @ 0xfe980000/524288,
0xd0000000/268435456, 0xfe800000/1048576, I/O @ 0x0000dc00/8
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 2.7.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 0...@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "XvMC" "on"
(II) intel(0): Integrated Graphics Chipset: Intel(R) Q35
(--) intel(0): Chipset: "Q35"
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): Resizable framebuffer: available (0 4)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): Output VGA1 using monitor section VGA
(**) intel(0): Option "PreferredMode" "1280x1024"
(II) intel(0): EDID for output VGA1
(II) intel(0): Manufacturer: WDE Model: 1702 Serial#: 0
(II) intel(0): Year: 2005 Week: 45
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): Default color space is primary color space
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): GTF timings supported
(II) intel(0): redX: 0.643 redY: 0.352 greenX: 0.283 greenY: 0.608
(II) intel(0): blueX: 0.147 blueY: 0.102 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x...@70hz
(II) intel(0): 640x...@60hz
(II) intel(0): 640x...@67hz
(II) intel(0): 640x...@72hz
(II) intel(0): 640x...@75hz
(II) intel(0): 800x...@56hz
(II) intel(0): 800x...@60hz
(II) intel(0): 800x...@72hz
(II) intel(0): 800x...@75hz
(II) intel(0): 832x...@75hz
(II) intel(0): 1024x...@60hz
(II) intel(0): 1024x...@70hz
(II) intel(0): 1024x...@75hz
(II) intel(0): 1280x1...@75hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688
h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066
v_border: 0
(II) intel(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz,
PixClock max 140 MHz
(II) intel(0): Monitor name: WDE LCM-17v2
(II) intel(0): Serial No: 0
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff005c85021700000000
(II) intel(0): 2d0f010368221b78ef8bc5a45a489b25
(II) intel(0): 1a5054bfef008180714f010101010101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520e1100001e000000fd00324b1e
(II) intel(0): 520e000a202020202020000000fc0057
(II) intel(0): 4445204c434d2d313776320a000000ff
(II) intel(0): 00300a202020202020202020202000c8
(II) intel(0): EDID vendor "WDE", prod id 5890
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025
1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500
-hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520
-hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525
-hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525
-hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449
-hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025
1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769
772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628
667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643
666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025
1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865
868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1280x960" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x1024" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x864" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support
reduced blanking)
(II) intel(0): Not using default mode "1400x1050" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1400x1050" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1400x1050" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1680x1050" (monitor doesn't support
reduced blanking)
(II) intel(0): Not using default mode "1680x1050" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1680x1050" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1680x1050" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1680x1050" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1080" (monitor doesn't support
reduced blanking)
(II) intel(0): Not using default mode "1920x1200" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024
1024 1029 1030 +hsync +vsync (62.0 kHz)
(II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050
1052 1064 1082 +hsync +vsync (64.9 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024
1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903
909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961
964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771
781 798 -hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865
868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865
868 902 -hsync +vsync (67.6 kHz)
(II) intel(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536 864 865
868 900 -hsync +vsync (63.0 kHz)
(II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865
868 895 -hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769
772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769
772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628
667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643
666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491
520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484
500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492
520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484
500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486
525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414
449 -hsync +vsync (31.5 kHz)
(II) intel(0): Output VGA1 connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA1 using initial mode 1280x1024
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (340, 270) mm
(**) intel(0): DPI set to (95, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: -1 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: Failed
(WW) intel(0): Option "PreferredMode" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 270
(II) config/hal: Adding input device btnx mouse
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) btnx mouse: always reports core events
(**) btnx mouse: Device: "/dev/input/event8"
(II) btnx mouse: Found 32 mouse buttons
(II) btnx mouse: Found x and y relative axes
(II) btnx mouse: Found scroll wheel(s)
(II) btnx mouse: Configuring as mouse
(**) btnx mouse: YAxisMapping: buttons 4 and 5
(**) btnx mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "btnx mouse" (type: MOUSE)
(**) btnx mouse: (accel) keeping acceleration scheme 1
(**) btnx mouse: (accel) filter chain progression: 2.00
(**) btnx mouse: (accel) filter stage 0: 20.00 ms
(**) btnx mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device btnx keyboard
(**) btnx keyboard: always reports core events
(**) btnx keyboard: Device: "/dev/input/event7"
(II) btnx keyboard: Found keys
(II) btnx keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "btnx keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "logimel"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "lv3:ralt_switch,compose:menu"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "logimel"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "lv3:ralt_switch,compose:menu"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation"
(type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event2"
(II) Logitech USB-PS/2 Optical Mouse: Found 6 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse"
(type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
(II) Logitech USB-PS/2 Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) btnx keyboard: Close
(II) UnloadModule: "evdev"
(II) btnx mouse: Close
(II) UnloadModule: "evdev"
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x26) [0x4ede76]
1: /usr/bin/X(xf86SigHandler+0x39) [0x483249]
2: /lib/libc.so.6 [0x7ff1f98370f0]
3: /usr/lib/libdrm_intel.so.1 [0x7ff1f76427d9]
4: /usr/lib/xorg/modules/drivers//intel_drv.so [0x7ff1f7873bf6]
5: /usr/bin/X [0x502649]
6: /usr/bin/X [0x530cc3]
7: /usr/bin/X(main+0x434) [0x433294]
8: /lib/libc.so.6(__libc_start_main+0xe6) [0x7ff1f98235a6]
9: /usr/bin/X [0x4326a9]
Fatal server error:
Caught signal 11. Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional
information.
HAL Information (lshal):
Dumping 157 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
access_control.file = '/dev/input/event0' (string)
access_control.type = 'mouse' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Macintosh mouse button emulation' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
(string)
input.device = '/dev/input/event0' (string)
input.product = 'Macintosh mouse button emulation' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/virtual/input/input0/event0' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys',
'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'btnx keyboard' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
(string)
input.device = '/dev/input/event7' (string)
input.product = 'btnx keyboard' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'logimel' (string)
input.xkb.options = 'lv3:ralt_switch,compose:menu' (string)
input.xkb.rules = 'base' (string)
linux.device_file = '/dev/input/event7' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/virtual/input/input7/event7' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3'
access_control.file = '/dev/input/event8' (string)
access_control.type = 'mouse' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'btnx mouse' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3'
(string)
input.device = '/dev/input/event8' (string)
input.product = 'btnx mouse' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event8' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/virtual/input/input8/event8' (string)
udi =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys',
'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
(string)
info.product = 'AT Translated Set 2 keyboard' (string)
info.subsystem = 'input' (string)
info.udi =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
(string)
input.device = '/dev/input/event1' (string)
input.originating_device =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
input.product = 'AT Translated Set 2 keyboard' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'logimel' (string)
input.xkb.options = 'lv3:ralt_switch,compose:menu' (string)
input.xkb.rules = 'base' (string)
linux.device_file = '/dev/input/event1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input1/event1'
(string)
udi =
'/org/freedesktop/Hal/devices/usb_device_46d_c01b_noserial_if0_logicaldev_input'
access_control.file = '/dev/input/event2' (string)
access_control.type = 'mouse' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c01b_noserial_if0'
(string)
info.product = 'Logitech USB-PS/2 Optical Mouse' (string)
info.subsystem = 'input' (string)
info.udi =
'/org/freedesktop/Hal/devices/usb_device_46d_c01b_noserial_if0_logicaldev_input'
(string)
input.device = '/dev/input/event2' (string)
input.originating_device =
'/org/freedesktop/Hal/devices/usb_device_46d_c01b_noserial_if0' (string)
input.product = 'Logitech USB-PS/2 Optical Mouse' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input2/event2'
(string)
DRM Information from dmesg:
[ 0.004000] No AGP bridge found
[ 0.981254] Linux agpgart interface v0.103
[ 1.106846] agpgart-intel 0000:00:00.0: Intel Q35 Chipset
[ 1.107620] agpgart-intel 0000:00:00.0: detected 6140K stolen memory
[ 1.111124] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.139677] [drm] Initialized drm 1.1.0 20060810
[ 1.485583] [drm] DAC-6: set mode 1280x1024 18
[ 1.510775] fb0: inteldrmfb frame buffer device
[ 1.510899] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-core depends on:
ii libaudit0 1.7.13-1 Dynamic library for security audit
ii libc6 2.9-13 GNU C Library: Shared libraries
ii libdbus-1-3 1.2.14-3 simple interprocess messaging syst
ii libdrm2 2.4.11-1 Userspace interface to kernel DRM
ii libfontenc1 1:1.0.4-3 X11 font encoding library
ii libgcrypt11 1.4.4-2 LGPL Crypto library - runtime libr
ii libhal1 0.5.12~git20090406.46dc48-2 Hardware Abstraction Layer - share
ii libpciaccess 0.10.6-1 Generic PCI access library for X
ii libpixman-1- 0.14.0-1 pixel-manipulation library for X a
ii libselinux1 2.0.82-1 SELinux shared libraries
ii libxau6 1:1.0.4-2 X11 authorisation library
ii libxdmcp6 1:1.0.2-3 X11 Display Manager Control Protoc
ii libxfont1 1:1.4.0-1 X11 font rasterisation library
ii xserver-comm 2:1.6.1.901-3 common files used by various X ser
ii xserver-xorg 1:7.4+3 the X.Org X server
Versions of packages xserver-xorg-core recommends:
ii libgl1-mesa-dri 7.4.1-1 A free implementation of the OpenG
ii xkb-data 1.6-1 X Keyboard Extension (XKB) configu
Versions of packages xserver-xorg-core suggests:
ii xfonts-100dpi 1:1.0.0-4 100 dpi fonts for X
ii xfonts-75dpi 1:1.0.0-4 75 dpi fonts for X
ii xfonts-base 1:1.0.0-6 standard fonts for X
ii xfonts-scalable 1:1.0.0-7 scalable fonts for X
-- no debconf information
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
