On Fri, 2006-01-06 at 15:10 +0100, Luca Capello wrote: > > On Fri, 06 Jan 2006 14:41:06 +0100, Michel Dänzer wrote: > > On Fri, 2006-01-06 at 13:41 +0100, Luca Capello wrote: > >> > >> [...] what should I do for the DRI bug? > > > > There is no bug, this is the reason why Option "AGPFastWrite" > > defaults to off. > > Sorry, probably I missunderstood what r300 supports and what it > doesn't. > > On XP I installed the Omega drivers and at [1] it seems that > "AGPFastWrite" is available only for 9600 and Athlon 64 systems (which > I don't have, it's a Intel Pentium M 1.8GHz). Infact, using the Omega > setting tool, I cannot switch the "AGPFastWrite" option on. So I > suppose it's _must_ be off (but I don't know at all about graphic > cards). > > From the r300 [2] and the DRI [3] websites, my FireGL T2 / M10 has the > rv350 chipset, which should be *experimentally* supported by the r300 > DRI driver. Am I correct? Or am I missing something?
Correct, but the r300 DRI driver doesn't have anything to do with this. > The problem is that X.Org 6.9.0 with Benjamin's patch still freezes > after a while even with "AGPFastWrite" off (when I start quake3, but > not when I start glxgears). > > I'd like to debug the problem, as this is the only way I can help > supporting my M10 by the DRI framework (sorry, I'm not a programmer). The r300 DRI driver is still very experimental and undergoing rapid development. You should probably check out the DRI project website and/or mailing lists. -- Earthling Michel Dänzer | Debian (powerpc), X and DRI developer Libre software enthusiast | http://svcs.affero.net/rm.php?r=daenzer
