Hi, I'm reading this mailinglist from the Web, so I have to 'reply' like this.
Even with all Juliusz advices, I couldn't get X to work in 1280x1024 mode. According to Intel, I should be able to use [EMAIL PROTECTED] My Monitor, Eizo FlexScan F520 should be able to do this too: H: 30-96kHz V: 50-160Hz Maximum resolution: 1280x1024 / 89 Hz. According to the info from the log, my video's (i810) clock range is: 12-136 MHz, but the Intel Programmer's Manual says: Clock Select. These bits usually select the dot clock source for the CRT interface. The bits select the dot clock in standard VGA modes. 1x = CLK2 (Left "reserved" in standard VGA, used for all extended modes 6 MHz - 135 MHz.) So, with all this information, could anyone help me to get X running in 1280x1024x24 mode? Please? :-) I tried it with the Howto, but I can't get a mode that works... Grtjs, Manuel PS: MSX 4 ever! (Questions? FAQ: http://www.faq.msxnet.org/ ) PPS: Visit my homepage: http://bilderbeek.cjb.net/
