On Thu, Aug 28, 2003 at 09:26:23AM +0200, David N. Welton wrote: > Sven Luther <[EMAIL PROTECTED]> writes: > > > On Wed, Aug 27, 2003 at 03:14:54AM -0500, Branden Robinson wrote: > > > On Wed, Aug 27, 2003 at 07:34:55AM +0200, Sven Luther wrote: > > > > > This don't bring us much, it is hanging in glint_wait, which is > > > > a macro waiting for space in the fifo, and since the space never > > > > comes, it waits forever. Same diagnostic as before. The pipeline > > > > is deadlocked, but i don't know why. Strong suspisions of a > > > > hardware problems, the hardware cannot be all that new after > > > > all. But maybe there is some behavior that makes this appear > > > > more often or something such, i don't know. Overheating of the > > > > graphic chip or failing powersupply (either on the board or the > > > > agp power lines) might be potential culprits. > > > > Well, if it's truly a hardware problem, sure it wouldn't affect just > > > this accleration primitive. > > > > David, can you try adding the following to your Screen section in > > > XF86Config-4? > > > > Option "XaaNoSolidHorVertLine" > > > > (This is documented in XF86Config-4(5x).) > > Didn't see this come through... maybe the mail is being a bit slow > again.
You still have 4.2.1 haven't you ? You could upgrade to 4.3.0 to experimental, i already have a built tree for it, if not i will have to download the 4.2.1 tarballs and build the driver. It shouldn't make any difference in your case though if you have 4.3.0 or 4.2.1 though. Friendly, Sven Luther -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
