Sven Luther <[EMAIL PROTECTED]> writes: > On Wed, Aug 27, 2003 at 03:14:54AM -0500, Branden Robinson wrote: > > On Wed, Aug 27, 2003 at 07:34:55AM +0200, Sven Luther wrote:
> > > This don't bring us much, it is hanging in glint_wait, which is > > > a macro waiting for space in the fifo, and since the space never > > > comes, it waits forever. Same diagnostic as before. The pipeline > > > is deadlocked, but i don't know why. Strong suspisions of a > > > hardware problems, the hardware cannot be all that new after > > > all. But maybe there is some behavior that makes this appear > > > more often or something such, i don't know. Overheating of the > > > graphic chip or failing powersupply (either on the board or the > > > agp power lines) might be potential culprits. > > Well, if it's truly a hardware problem, sure it wouldn't affect just > > this accleration primitive. > > David, can you try adding the following to your Screen section in > > XF86Config-4? > > Option "XaaNoSolidHorVertLine" > > (This is documented in XF86Config-4(5x).) Didn't see this come through... maybe the mail is being a bit slow again. > It would affect all of them, but be triggered there by either the > fifo size, or some other reason. It hangs in GLINT_WAIT, so the > problem most probably is in the accel primitive _before_ this one. So it's not worth trying? FWIW, turning on the noaccel option *seems* to make it not crash. Not a perfect solution, but I can live with it. I am still available to run test code or try things out though. Ciao, -- David N. Welton Consulting: http://www.dedasys.com/ Personal: http://www.dedasys.com/davidw/ Free Software: http://www.dedasys.com/freesoftware/ Apache Tcl: http://tcl.apache.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
