Hello,
I am running Debian testing, and have recently upgraded to XFree86 4.3.0
using "apt-get upgrade". I have a problem I have no idea how to solve, so I
would appreciate a few pointers.
If I try to change to a text terminal once X is started (using Ctrl-Alt-F1
for example), no text is displayed. It looks as if the monitor is not
switched back to text mode or is in an invalid frequency range, because I
see some lines moving everywhere on the screen but no text. However, I can
type commands and they are executed (I know because, for example, I can
"shutdown -r now") but I have no idea why I can't see the text... And I can
switch back to X with Ctrl-Alt-F7 just fine.
Here is my XF86Config-4 file, in case that makes any difference. I generated
it with xf86cfg, and tweaked it a bit (i.e. added a DefaultDepth line and
the Modes lines in each depth to limit the modes I want). If you're
wondering why I have a BusID line in the Device section for my video card,
it's because X would not start ("no screens found") if I didn't put it in.
This is also new for me, because the X version I had before (4.2.1 I
believe) did not need this.
________________________________________________________________
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/gpmdata"
EndSection
Section "Monitor"
Identifier "ViewSonic P95f+"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 160.0
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "PciRetry" # [<bool>]
#Option "SyncOnGreen" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "Overlay" # [<str>]
#Option "MGASDRAM" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "ColorKey" # <i>
#Option "SetMclk" # <freq>
#Option "OverclockMem" # [<bool>]
#Option "VideoKey" # <i>
#Option "Rotate" # [<str>]
#Option "TexturedVideo" # [<bool>]
#Option "Crtc2Half" # [<bool>]
#Option "Crtc2Ram" # <i>
#Option "Int10" # [<bool>]
#Option "AGPMode" # <i>
#Option "AGPSize" # <i>
#Option "DigitalScreen1" # [<bool>]
#Option "DigitalScreen2" # [<bool>]
#Option "TV" # [<bool>]
#Option "TVStandard" # [<str>]
#Option "CableType" # [<str>]
#Option "NoHal" # [<bool>]
#Option "SwappedHead" # [<bool>]
#Option "DRI" # [<bool>]
#Option "MergedFB" # [<bool>]
#Option "Monitor2HSync" # [<str>]
#Option "Monitor2VRefresh" # [<str>]
#Option "Monitor2Position" # [<str>]
#Option "MetaModes" # [<str>]
Identifier "Matrox Mystique"
Driver "mga"
VendorName "Matrox Graphics, Inc."
BoardName "MGA 1064SG [Mystique]"
ChipSet "mga1064sg"
BusID "PCI:0:7:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Matrox Mystique"
Monitor "ViewSonic P95f+"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
EndSection
________________________________________________________________
I would appreciate any ideas in fixing these problems. Thanks in advance,
__________________________________________
Jean-Sébastien [EMAIL PROTECTED]
http://whitestar02.webhop.org/
