Hello
Adam (<[EMAIL PROTECTED]>) wrote:
> On Friday 23 January 2004 23:00, Andreas Janssen wrote:
>
>> Did you mount the usbdevfs? Add this to your fstab:
>>
>> usbdevfs /proc/bus/usb usbdevfs defaults 0 0
>
> I'll try it and report back. For info, my old (Mandrake) fstab
> contained the following "special" (other than floppy and HDD) entries:
>
> none /dev/pts devpts mode=0620 0 0
> none /dev/shm tmpfs defaults 0 0
> /dev/hdb /mnt/cdrom iso9660 users,iocharset=iso8859-15,ro,noauto 0 0
> /dev/scd0 /mnt/cdrom2 iso9660 users,iocharset=iso8859-15,ro,noauto 0 0
> none /proc proc defaults 0 0
>
> whereas my current fstab has these:
>
> /dev/hdc /cdrom auto ro,user,noauto 0 0
> proc /proc proc defaults 0 0
You need to add the line for usbdvfs to make is accessible under
/proc/bus/usb.
>> Did you rerun lilo?
>
> Well, I rebooted!
That doesn't mean anything. You must rerun lilo to save the changes to
your bootloader configuration.
>> What does dmesg | grep cd say? What does dmesg |
>> grep command say?
>
> /home/adam $ dmesg |grep cd
> hdc: attached ide-cdrom driver.
> hdd: attached ide-cdrom driver.
This shows that your system uses the ide-cd driver indtead of ide-scsi.
That is why they aren't listed in /proc/scsi/scsi.
> /home/adam $ dmesg |grep command
> Kernel command line: auto BOOT_IMAGE=Linux root=301
See? That should be "auto BOOT_IMAGE=Linux root=301 hdc=ide-scsi
hdd=ide-scsi". Obviously it isn't. Rerun lilo. Or, as you use a module
configuration, add the following line to some file in /etc/modutils/
(/etc/modutils/ide-cd for erxample):
options ide-cd ignore=hdc ignore=hdd
next, run update-modules to save the changes to /etc/modules.conf and
unload the ide-cd driver:
#rmmod ide-cd
Unload the ide-scsi driver:
#rmmod ide-scsi
Now reload the ide-scsi driver:
#modprobe ide-scsi.
best regards
Andreas Janssen
--
Andreas Janssen
[EMAIL PROTECTED]
PGP-Key-ID: 0xDC801674
Registered Linux User #267976
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
