Hi, meine Festplatte weigert sich standhaft, in den DMA-Modus zu gehen.
nathan:/home/mati# hdparm -d1 /dev/hda /dev/hda: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) nathan:/home/mati# dmesg | grep hda hda: SAMSUNG SP1614N, ATA DISK drive hda: attached ide-disk driver. hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63 nathan:/home/mati# cat /var/log/syslog | grep hda Jan 16 21:25:03 nathan kernel: hda: SAMSUNG SP1614N, ATA DISK drive Jan 16 21:25:03 nathan kernel: hda: attached ide-disk driver. Jan 16 21:25:03 nathan kernel: hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63 nathan:/home/mati# dmesg | grep ide ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide2: BM-DMA at 0x7000-0x7007, BIOS settings: hde:DMA, hdf:DMA ide3: BM-DMA at 0x7008-0x700f, BIOS settings: hdg:DMA, hdh:pio ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0x8400-0x8407,0x8002 on irq 10 ide3 at 0x7800-0x7807,0x7402 on irq 10 hda: attached ide-disk driver. hde: attached ide-disk driver. hdg: attached ide-disk driver. /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 > /dev/ide/host2/bus0/target0/lun0: [PTBL] [2482/255/63] p1 p2 < p5 p6 p7 p8 > /dev/ide/host2/bus1/target0/lun0: [PTBL] [7297/255/63] p1 p2 p3 < p5 p6 p7 > EXT3 FS 2.4-0.9.19, 19 August 2002 on ide3(34,2), internal journal EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal EXT3 FS 2.4-0.9.19, 19 August 2002 on ide3(34,6), internal journal Kernel ist 2.4.22 Habt Ihr Tips für mich? -- mfg Matthias Taube -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
