hi ya stephen
you're missing some modules ( the one for /dev/pg0 )
complete list of modules ( kernel options ) that is needed
http://www.linux-1u.net/CDRW
c ya
alvin
On Sun, 11 Jan 2004, Stephen Liu wrote:
> Hi all folks,
>
> GNOME console
>
> I met following problem in burning CD
>
> # cdrecord dev=0,0,0 speed=12 blank=all -eject
> Cdrecord-Clone 2.01a24 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J�rg
> Schillin g
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> cdrecord.mmap: No such file or directory. Cannot open '/dev/pg0'. Cannot open
> SC SI driver.
> cdrecord.mmap: For possible targets try 'cdrecord -scanbus'. Make sure you are
> r oot.
> cdrecord.mmap: For possible transport specifiers try 'cdrecord dev=help'.
> cdrecord.mmap: Also make sure that you have loaded the sg driver and the
> driver for
> cdrecord.mmap: SCSI hardware, eg. ide-scsi if you run IDE/ATAPI drives over
> cdrecord.mmap: ide-scsi emulation. For more information, install the
> cdrtools-do c
> cdrecord.mmap: package and read /usr/share/doc/cdrecord/README.ATAPI.setup
>
> However I could not locate 'README.ATAPI.setup'
>
> # locate README.ATAPI.setup
> # find / -name readme.atapi.setup
> all no printout
>
> # dvd=yes cdrecord dev=0,0,0 speed=12 blank=all -v -eject
> Cdrecord-Clone 2.01a24 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J�rg
> Schillin g
> TOC Type: 1 = CD-ROM
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> cdrecord.mmap: No such file or directory. Cannot open '/dev/pg0'. Cannot open
> SC SI driver.
> cdrecord.mmap: For possible targets try 'cdrecord -scanbus'. Make sure you are
> r oot.
> cdrecord.mmap: For possible transport specifiers try 'cdrecord dev=help'.
> cdrecord.mmap: Also make sure that you have loaded the sg driver and the
> driver for
> cdrecord.mmap: SCSI hardware, eg. ide-scsi if you run IDE/ATAPI drives over
> cdrecord.mmap: ide-scsi emulation. For more information, install the
> cdrtools-do c
> cdrecord.mmap: package and read /usr/share/doc/cdrecord/README.ATAPI.setup .
>
> # apt-cache search cdrecord.nmap
> No printout
>
> Kindly advise how to proceed.
>
> TIA
>
> B.R.
> Stephen Liu
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
>
>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
