Hi all folks, GNOME console
I met following problem in burning CD # cdrecord dev=0,0,0 speed=12 blank=all -eject Cdrecord-Clone 2.01a24 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jïrg Schillin g scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 cdrecord.mmap: No such file or directory. Cannot open '/dev/pg0'. Cannot open SC SI driver. cdrecord.mmap: For possible targets try 'cdrecord -scanbus'. Make sure you are r oot. cdrecord.mmap: For possible transport specifiers try 'cdrecord dev=help'. cdrecord.mmap: Also make sure that you have loaded the sg driver and the driver for cdrecord.mmap: SCSI hardware, eg. ide-scsi if you run IDE/ATAPI drives over cdrecord.mmap: ide-scsi emulation. For more information, install the cdrtools-do c cdrecord.mmap: package and read /usr/share/doc/cdrecord/README.ATAPI.setup However I could not locate 'README.ATAPI.setup' # locate README.ATAPI.setup # find / -name readme.atapi.setup all no printout # dvd=yes cdrecord dev=0,0,0 speed=12 blank=all -v -eject Cdrecord-Clone 2.01a24 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jïrg Schillin g TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 cdrecord.mmap: No such file or directory. Cannot open '/dev/pg0'. Cannot open SC SI driver. cdrecord.mmap: For possible targets try 'cdrecord -scanbus'. Make sure you are r oot. cdrecord.mmap: For possible transport specifiers try 'cdrecord dev=help'. cdrecord.mmap: Also make sure that you have loaded the sg driver and the driver for cdrecord.mmap: SCSI hardware, eg. ide-scsi if you run IDE/ATAPI drives over cdrecord.mmap: ide-scsi emulation. For more information, install the cdrtools-do c cdrecord.mmap: package and read /usr/share/doc/cdrecord/README.ATAPI.setup . # apt-cache search cdrecord.nmap No printout Kindly advise how to proceed. TIA B.R. Stephen Liu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
