On Ma, 25 ian 22, 21:27:17, gene heskett wrote: > > It works fine with no complaints. > > Here is the bottom of /etc/dhcpcd.conf: > > # Example static IP configuration: > #interface eth0 > #static ip_address=192.168.0.10/24 > #static ip6_address=fd51:42f8:caae:d92e::ff/64 > #static routers=192.168.0.1 > #static domain_name_servers=192.168.0.1 8.8.8.8 fd51:42f8:caae:d92e::1 > > # It is possible to fall back to a static IP if DHCP fails: > # define static profile > profile static_eth0 > static ip_address=192.168.71.13/24 > static routers=192.168.71.1 > static domain_name_servers=192.168.71.1 > > # fallback to static profile on eth0 > interface eth0 > fallback static_eth0 > > So if dhcpd fails, it uses the above, and it Just Works. > And I've not found any reference to it in the man page. So I've no clue > why it seems to be such a huge, no one knows about it secret.
This must be the most complicated, round-about, inefficient method I've ever seen to configure a static IP :) Is it so difficult to find out what is the canonical method to configure a static IP on a Raspberry Pi OS? This is such a basic task it should be somewhere in their documentation, wiki, whatever. Even if they don't officially support static IPs (which I seriously doubt), you could still find out what is starting dhcpcd and disable it. Then it should be possible to configure a static IP with any of Debian's network management tools you like. You might need to install it first though, preferably while the network connection is still up ;). Kind regards, Andrei -- http://wiki.debian.org/FAQsFromDebianUser
signature.asc
Description: PGP signature
