On Friday 04 January 2019 15:38:32 Brian wrote: > On Fri 04 Jan 2019 at 15:27:11 -0500, Gene Heskett wrote: > > On Friday 04 January 2019 13:46:28 deloptes wrote: > > > Gene Heskett wrote: > > > > I've built 3 rt kernels on the pi, takes it about 4 hours. But > > > > for the life of me, I can't find an installer that will actually > > > > do the pi, its boot is a separate mess. I'm sure it can be done > > > > as I also have a pair of rock64's running armbian, and I have > > > > seen apt install a new kernel on the one I'm playing with, twice > > > > to its u-sd card. And installer that actually works would be > > > > nice as a make install doesn't seem to exist in the linux-rt > > > > kernel sources I have pulled, from the linux-rt lists > > > > announcements do not seem to have that recipe in the makefiles. > > > > > > There is a good how to I used for setting up RPI. I copied > > > whatever it needed to an old SD card and configured to boot from > > > NFS server. This made testing much easier. If I could do it I bet > > > you can as well > > > > > > Fore example see "The Boot" here > > > https://raspberrypi.stackexchange.com/questions/39959/raspbian-boo > > >t-pr ocess-and-the-partition-table > > > > One HUGE problem with that page. Its not printable! What the he!! > > good is > > Of course it is printable. Whatever you are doing is unknown.
My copy of FF only prints 1 page, which is the top 3" of the site's front page, never getting down to any of the text past the headline. And it works on other sites. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene>
