On Fri 04 Jan 2019 at 15:27:11 -0500, Gene Heskett wrote: > On Friday 04 January 2019 13:46:28 deloptes wrote: > > > Gene Heskett wrote: > > > I've built 3 rt kernels on the pi, takes it about 4 hours. But for > > > the life of me, I can't find an installer that will actually do the > > > pi, its boot is a separate mess. I'm sure it can be done as I also > > > have a pair of rock64's running armbian, and I have seen apt install > > > a new kernel on the one I'm playing with, twice to its u-sd card. > > > And installer that actually works would be nice as a make install > > > doesn't seem to exist in the linux-rt kernel sources I have pulled, > > > from the linux-rt lists announcements do not seem to have that > > > recipe in the makefiles. > > > > There is a good how to I used for setting up RPI. I copied whatever it > > needed to an old SD card and configured to boot from NFS server. This > > made testing much easier. If I could do it I bet you can as well > > > > Fore example see "The Boot" here > > https://raspberrypi.stackexchange.com/questions/39959/raspbian-boot-pr > >ocess-and-the-partition-table > > One HUGE problem with that page. Its not printable! What the he!! good is
Of course it is printable. Whatever you are doing is unknown. -- Brian.
