Hi,
When I plug a Kingston 1Gb pendrive on my desktop, was popup a information:
Don't was possible to mount "JANA"
Not authorization
dmesg output
[26060.620029] usb 3-2: new full speed USB device using uhci_hcd and address 6
[26060.804550] usb 3-2: New USB device found, idVendor=13fe, idProduct=1d00
[26060.804554] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[26060.804556] usb 3-2: Product: DataTraveler 2.0
[26060.804558] usb 3-2: Manufacturer: Kingston
[26060.804559] usb 3-2: SerialNumber: 5B7907AF017B
[26060.804657] usb 3-2: configuration #1 chosen from 1 choice
[26060.807655] scsi8 : SCSI emulation for USB Mass Storage devices
[26060.807962] usb-storage: device found at 6
[26060.807963] usb-storage: waiting for device to settle before scanning
[26065.810310] usb-storage: device scan complete
[26065.821659] scsi 8:0:0:0: Direct-Access Kingston DataTraveler
2.0 PMAP PQ: 0 ANSI: 0 CCS
[26065.822262] sd 8:0:0:0: Attached scsi generic sg2 type 0
[26066.047699] sd 8:0:0:0: [sdb] 2015232 512-byte logical blocks:
(1.03 GB/984 MiB)
[26066.050668] sd 8:0:0:0: [sdb] Write Protect is off
[26066.050672] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00
[26066.050674] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[26066.065644] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[26066.065649] sdb: sdb1
[26066.080657] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[26066.080664] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[26096.733215] FAT: utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[26096.736220] FAT: invalid media value (0xb9)
[26096.736225] VFS: Can't find a valid FAT filesystem on dev sdb.
[26210.792055] usb 3-2: USB disconnect, address 6
[26218.059833] usb 3-2: new full speed USB device using uhci_hcd and address 7
[26218.230152] usb 3-2: New USB device found, idVendor=13fe, idProduct=1d00
[26218.230155] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[26218.230158] usb 3-2: Product: DataTraveler 2.0
[26218.230159] usb 3-2: Manufacturer: Kingston
[26218.230161] usb 3-2: SerialNumber: 5B7907AF017B
[26218.230258] usb 3-2: configuration #1 chosen from 1 choice
[26218.248540] scsi9 : SCSI emulation for USB Mass Storage devices
[26218.252679] usb-storage: device found at 7
[26218.252681] usb-storage: waiting for device to settle before scanning
[26223.255925] usb-storage: device scan complete
[26223.258256] scsi 9:0:0:0: Direct-Access Kingston DataTraveler
2.0 PMAP PQ: 0 ANSI: 0 CCS
[26223.259249] sd 9:0:0:0: Attached scsi generic sg2 type 0
[26223.483271] sd 9:0:0:0: [sdb] 2015232 512-byte logical blocks:
(1.03 GB/984 MiB)
[26223.486261] sd 9:0:0:0: [sdb] Write Protect is off
[26223.486264] sd 9:0:0:0: [sdb] Mode Sense: 23 00 00 00
[26223.486266] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[26223.501248] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[26223.501254] sdb: sdb1
[26223.517267] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[26223.517272] sd 9:0:0:0: [sdb] Attached SCSI removable disk
I try to mount it by command line as root:
# mount -t vfat -o umask=0000 /dev/sdb /media/pen/
mount: wrong fs type, bad option, bad superblock on /dev/sdb,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
#
In my notebook it was mounted normally. Automatically!
My Desktop is a Multiseat (multihead) system with two monitors.
# cat /etc/group
root:x:0:
daemon:x:1:
bin:x:2:
sys:x:3:
adm:x:4:
tty:x:5:
disk:x:6:
lp:x:7:
mail:x:8:
news:x:9:
uucp:x:10:
man:x:12:
proxy:x:13:
kmem:x:15:
dialout:x:20:inael
fax:x:21:
voice:x:22:
cdrom:x:24:inael,marcella,janaina
floppy:x:25:inael,marcella,janaina
tape:x:26:
sudo:x:27:
audio:x:29:inael,timidity,pulse
dip:x:30:
www-data:x:33:
backup:x:34:
operator:x:37:
list:x:38:
irc:x:39:
src:x:40:
gnats:x:41:
shadow:x:42:
utmp:x:43:
video:x:44:inael
sasl:x:45:
plugdev:x:46:inael,marcella,janaina
staff:x:50:
games:x:60:
users:x:100:
nogroup:x:65534:
libuuid:x:101:
crontab:x:102:
Debian-exim:x:103:
mlocate:x:104:
ssh:x:105:
inael:x:1000:
messagebus:x:106:
fuse:x:107:marcella,janaina,inael
utempter:x:108:
Debian-gdm:x:109:
netdev:x:110:inael
avahi:x:111:
lpadmin:x:112:
ssl-cert:x:113:
scanner:x:114:saned,marcella,janaina,inael
saned:x:115:
haldaemon:x:116:
powerdev:x:117:
timidity:x:118:
pulse:x:119:
pulse-access:x:120:inael,marcella
ntp:x:121:
kvm:x:122:
vde2-net:x:123:
gdm:x:124:
marcella:x:1001:
sambashare:x:125:
janaina:x:1002:
vboxusers:x:126:marcella,janaina,inael
I already have googled, but, all info not solved!
Thank you very much!
--
Marcelo Luiz de Laia
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/aanlktikt9ecdibipjfab84tfv2m+k6wjdgq4pguun...@mail.gmail.com
