On Wed, 28 Jul 2010 10:41:52 -0500, hugo vanwoerkom wrote: > Camaleón wrote:
(...) >> I would try first to get an accurate temperature measure for the CPU >> (69° C is a bit high, even for a laptop, but not critical -that depends >> on the microprocessor type-). Are you able to get these values from >> BIOS? Just to make a comparison... >> >> > 'sensors-detect' gets: > Sorry, no sensors were detected. > Either your sensors are not supported, or they are connected to an I2C > or SMBus adapter that is not supported. See > http://www.lm-sensors.org/wiki/FAQ/Chapter3 for further information. Did you read the suggested steps? http://www.lm-sensors.org/wiki/FAQ/Chapter3#Sensors-detectdoesntworkatall Mmm, does not look good. You can try to load the latest SystemRescueCD (a livecd) which has the latest version for "lm-sensors" package. If running "sensors-detect" there either works, then... dunno :-/ > BIOS shows nothing of either fan or temperature. Ouch :-( > The only temperature indicators are > h...@debian:~$ cat /sys/class/thermal/thermal_zone0/temp 66000 > h...@debian:~$ cat /sys/class/thermal/thermal_zone1/temp 50000 > > It is not clear what these refer to. Thermal zones are "points" defined to "ring the bell" (getting an alarm and provide an event → i.e., activating or speeding up the fan) to avoid overheating, but provided that your ACPI detection is not very accurate, I won't take that values very seriously. > 'fancontrol' is shown as part of the package lm-sensors. Yes :-( Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.07.28.16.59...@gmail.com
