Le jeudi 21 janvier 2010 à 11:56 +0000, Christian Koerner a écrit : > On Thu, 21 Jan 2010, Christian Koerner wrote: > > >> On Wed, 20 Jan 2010, amka wrote: > >> > >> And : ls -l /dev/sd* > >> brw-rw-rw- 1 root root 8, 0 Jan 20 22:22 /dev/sda > >> brw-rw-rw- 1 root root 8, 1 Jan 20 22:22 /dev/sda1 > >> brw-rw-rw- 1 root root 8, 2 Jan 20 22:22 /dev/sda2 > >> > >> But df prints sdc1 (CD resue mode). > >> > >> An other thing : > >> I am using an 'old' mainboard and the disk is new (WD1500HLFS). > >> I allready had problems when I trid to use a too big HDD (1TB) ; it was > >> not recognised and Tyan informed me that I have to upgrade my BIOS. > >> > >> I doubt this can have 'kernel panic' result. > > > > Not sure, it could be that the disk geometry is not detected properly and > > so > > it fails. > > IMO all your configs are ok. > > > > Alternativ is to give grub a go but you said you had problems with grub as > > well. > > Another possibility is to re-install Lenny when you have connected your new > HDD only.
OK, Christian, I think that I will try. Thanks for all, regards, Amel > Regards, > Christian > -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
