Hi André I also have a vostro. Do you have to run alsaconf everytime you want sound. As i have this problem do you. Dean
On Tue, Jan 13, 2009 at 6:45 AM, André Neves <andrechale...@gmail.com>wrote: > Hi Lewis. > > In my Dell Vostro, using amd64, I had to put this in > /etc/modprobe.d/alsa-base to get the sound working: > > options snd-hda-intel model=3stack > > Might work for you. > > André > > > On Tue, Jan 13, 2009 at 04:29, M. Lewis <ca...@cajuninc.com> wrote: > >> Javier Barroso wrote: >> >>> Hello, >>> >>> On Mon, Jan 12, 2009 at 12:54 PM, Bob <s...@homeurl.co.uk> wrote: >>> >>>> M. Lewis wrote: >>>> >>>>> I decided to change from 686 to AMD64 architecture after all the buzz >>>>>>> the past few days about the virtues of using the AMD64 architecture. >>>>>>> After >>>>>>> installing Lenny, I have no sound at all. (with 686, I had sound from >>>>>>> the >>>>>>> install, no problem). >>>>>>> >>>>>>> moe:~# lspci | grep -i audio >>>>>>> 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) >>>>>>> >>>>>> You want to read the bit on snd-hda-intel in >>>> /usr/share/doc/alsa-base/driver/ALSA-Configuration.txt >>>> try to identify your card and put a line a bit like this in >>>> /etc/modprobe.d/alsa-base >>>> options snd-hda-intel model=6stack-dig position_fix=1 >>>> >From [1] your could probe another line in /etc/modprobe.d/alsa-base >>>> >>> options snd-hda-intel model=acer position_fix=1 >>> >>> [1] >>> http://www.esdebian.org/foro/21968/problemas-sonido-debian-lenny-64bits-ati-technologies-inc-sbx00-solucionado >>> >>> In the last post they say "thanks", but I'm not sure if the sound worked >>> again >>> >>> Regards, >>> >> >> Unfortunately Javier, that didn't resolve the issue. Still no sound. >> Thanks, >> Mike >> -- >> >> State-of-the-practice: What we can do with the money you have. >> 00:25:02 up 1 min, 1 user, load average: 1.11, 0.44, 0.16 >> >> Linux Registered User #241685 http://counter.li.org >> >> >> -- >> To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a >> subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org >> >> >