Hi Lewis. In my Dell Vostro, using amd64, I had to put this in /etc/modprobe.d/alsa-base to get the sound working:
options snd-hda-intel model=3stack Might work for you. André On Tue, Jan 13, 2009 at 04:29, M. Lewis <ca...@cajuninc.com> wrote: > Javier Barroso wrote: > >> Hello, >> >> On Mon, Jan 12, 2009 at 12:54 PM, Bob <s...@homeurl.co.uk> wrote: >> >>> M. Lewis wrote: >>> >>>> I decided to change from 686 to AMD64 architecture after all the buzz >>>>>> the past few days about the virtues of using the AMD64 architecture. >>>>>> After >>>>>> installing Lenny, I have no sound at all. (with 686, I had sound from >>>>>> the >>>>>> install, no problem). >>>>>> >>>>>> moe:~# lspci | grep -i audio >>>>>> 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) >>>>>> >>>>> You want to read the bit on snd-hda-intel in >>> /usr/share/doc/alsa-base/driver/ALSA-Configuration.txt >>> try to identify your card and put a line a bit like this in >>> /etc/modprobe.d/alsa-base >>> options snd-hda-intel model=6stack-dig position_fix=1 >>> From [1] your could probe another line in /etc/modprobe.d/alsa-base >>> >> options snd-hda-intel model=acer position_fix=1 >> >> [1] >> http://www.esdebian.org/foro/21968/problemas-sonido-debian-lenny-64bits-ati-technologies-inc-sbx00-solucionado >> >> In the last post they say "thanks", but I'm not sure if the sound worked >> again >> >> Regards, >> > > Unfortunately Javier, that didn't resolve the issue. Still no sound. > Thanks, > Mike > -- > > State-of-the-practice: What we can do with the money you have. > 00:25:02 up 1 min, 1 user, load average: 1.11, 0.44, 0.16 > > Linux Registered User #241685 http://counter.li.org > > > -- > To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a > subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org > >
