On Sunday 23 March 2008 19:49, Bernardo Dal Seno wrote: > On 19/03/2008, Jörg Becker <[EMAIL PROTECTED]> wrote: > > I also tried noauto in fstab an manually mount after boot. But with the > > same result: device is busy. > > Does any error or warning message appear in kernel logs? Either at > startup, or when you try to mount the device? > No, I don't find any error or warning message about my sdc2, but from device-mapper, in the kernel logs.
Mar 19 16:19:41 gandalf kernel: SCSI device sdc: 586072367 512-byte hdwr sectors (300069 MB) Mar 19 16:19:41 gandalf kernel: sdc: Write Protect is off Mar 19 16:19:41 gandalf kernel: sdc: Mode Sense: 03 00 00 00 Mar 19 16:19:41 gandalf kernel: sdc: assuming drive cache: write through Mar 19 16:19:41 gandalf kernel: SCSI device sdc: 586072367 512-byte hdwr sectors (300069 MB) Mar 19 16:19:41 gandalf kernel: sdc: Write Protect is off Mar 19 16:19:41 gandalf kernel: sdc: Mode Sense: 03 00 00 00 Mar 19 16:19:41 gandalf kernel: sdc: assuming drive cache: write through Mar 19 16:19:41 gandalf kernel: sdc: sdc1 sdc2 sdc3 Mar 19 16:19:41 gandalf kernel: sd 0:0:0:0: Attached scsi disk sdc Nothing about mounting sdc2 or /media/backup. But after device scan I have some errors: Mar 19 16:19:41 gandalf kernel: usb-storage: device scan complete Mar 19 16:19:41 gandalf kernel: Filesystem "dm-0": Disabling barriers, not supported by the underlying device Mar 19 16:19:41 gandalf kernel: loop: loaded (max 8 devices) Mar 19 16:19:41 gandalf kernel: device-mapper: table: 254:8: linear: dm-linear: Device lookup failed Mar 19 16:19:41 gandalf kernel: device-mapper: ioctl: error adding target to table Mar 19 16:19:41 gandalf kernel: device-mapper: table: 254:8: linear: dm-linear: Device lookup failed ...repeated some times... Mar 19 16:19:41 gandalf kernel: device-mapper: ioctl: error adding target to table Mar 19 16:19:41 gandalf kernel: device-mapper: table: 254:11: linear: dm-linear: Device lookup failed Mar 19 16:19:41 gandalf kernel: device-mapper: ioctl: error adding target to table ...repeated some times... Mar 19 16:19:41 gandalf kernel: XFS mounting filesystem sda1 Mar 19 16:19:41 gandalf kernel: Ending clean XFS mount for filesystem: sda1 Mar 19 16:19:41 gandalf kernel: Filesystem "dm-5": Disabling barriers, not supported by the underlying device Mar 19 16:19:41 gandalf kernel: XFS mounting filesystem dm-5 Mar 19 16:19:41 gandalf kernel: Ending clean XFS mount for filesystem: dm-5 Mar 19 16:19:41 gandalf kernel: Filesystem "dm-4": Disabling barriers, not supported by the underlying device Mar 19 16:19:41 gandalf kernel: XFS mounting filesystem dm-4 Mar 19 16:19:41 gandalf kernel: Ending clean XFS mount for filesystem: dm-4 Mar 19 16:19:41 gandalf kernel: Filesystem "dm-1": Disabling barriers, not supported by the underlying device Mar 19 16:19:41 gandalf kernel: XFS mounting filesystem dm-1 Mar 19 16:19:41 gandalf kernel: Ending clean XFS mount for filesystem: dm-1 Mar 19 16:19:41 gandalf kernel: Filesystem "dm-2": Disabling barriers, not supported by the underlying device Mar 19 16:19:41 gandalf kernel: XFS mounting filesystem dm-2 Mar 19 16:19:41 gandalf kernel: Ending clean XFS mount for filesystem: dm-2 Mar 19 16:19:41 gandalf kernel: Filesystem "dm-6": Disabling barriers, not supported by the underlying device Mar 19 16:19:41 gandalf kernel: XFS mounting filesystem dm-6 Mar 19 16:19:41 gandalf kernel: Ending clean XFS mount for filesystem: dm-6 Mar 19 16:19:41 gandalf kernel: Filesystem "dm-7": Disabling barriers, not supported by the underlying device Mar 19 16:19:41 gandalf kernel: XFS mounting filesystem dm-7 Mar 19 16:19:41 gandalf kernel: Ending clean XFS mount for filesystem: dm-7 Mar 19 16:19:41 gandalf kernel: Adding 6152184k swap on /dev/mapper/gandalf-swap_1. Priority:-1 extents:1 across:6152184k After resetting my usb hd I get: Mar 19 17:21:01 gandalf kernel: usb 6-1: USB disconnect, address 2 Mar 19 17:21:11 gandalf kernel: usb 6-1: new high speed USB device using ehci_hcd and address 8 Mar 19 17:21:11 gandalf kernel: usb 6-1: configuration #1 chosen from 1 choice Mar 19 17:21:11 gandalf kernel: scsi6 : SCSI emulation for USB Mass Storage devices Mar 19 17:21:11 gandalf kernel: usb-storage: device found at 8 Mar 19 17:21:11 gandalf kernel: usb-storage: waiting for device to settle before scanning Mar 19 17:21:16 gandalf kernel: Vendor: WDC WD30 Model: 00JB-00KFA0 Rev: 08.0 Mar 19 17:21:16 gandalf kernel: Type: Direct-Access ANSI SCSI revision: 00 Mar 19 17:21:16 gandalf kernel: SCSI device sdf: 586072367 512-byte hdwr sectors (300069 MB) Mar 19 17:21:16 gandalf kernel: sdf: Write Protect is off Mar 19 17:21:16 gandalf kernel: sdf: Mode Sense: 03 00 00 00 Mar 19 17:21:16 gandalf kernel: sdf: assuming drive cache: write through Mar 19 17:21:16 gandalf kernel: SCSI device sdf: 586072367 512-byte hdwr sectors (300069 MB) Mar 19 17:21:16 gandalf kernel: sdf: Write Protect is off Mar 19 17:21:16 gandalf kernel: sdf: Mode Sense: 03 00 00 00 Mar 19 17:21:16 gandalf kernel: sdf: assuming drive cache: write through Mar 19 17:21:16 gandalf kernel: sdf: sdf1 sdf2 sdf3 Mar 19 17:21:16 gandalf kernel: sd 6:0:0:0: Attached scsi disk sdf Mar 19 17:21:16 gandalf kernel: sd 6:0:0:0: Attached scsi generic sg3 type 0 Mar 19 17:21:16 gandalf kernel: usb-storage: device scan complete Mar 19 17:24:13 gandalf kernel: XFS mounting filesystem sdf2 Mar 19 17:24:14 gandalf kernel: Ending clean XFS mount for filesystem: sdf2 Happy Easter Jörg
