2008/1/15, Andrew Sackville-West <[EMAIL PROTECTED]>: > On Tue, Jan 15, 2008 at 01:37:28PM +0100, Benjamin Schmidt wrote: > > Paul Csanyi wrote:
> >> I have installed Debian Etch with software raid 1. > >> > >> I am using for this two sata drives. > >> > >> Is it possyble to turn this system to non software raid? > >> > >> Doing so I wish to get the first sata drive to use with > >> Debian Etch as non software raid, and to use second > >> sata drive as a backup, and data drive. > > > > 1. Place your second harddisk to another bus (or plug it on over an > > usb-sata adapter) OR Remove in ~ /etc/mdadm the second disk. > > can't you just remove the second disk from mdadm and be done? I guess > you should turn off the raid portions of the boot by > > update-rc.d -f mdadm-raid remove > > I've not tested this, so buyer beware. Before that it is good maybe to edit fstab like bellow. What do you think? # software raid # #/dev/md0 /boot ext3 defaults 0 2 #/dev/md1 none swap sw 0 0 #/dev/md2 / ext3 defaults,errors=remount-ro 0 1 #/dev/md3 /home ext3 defaults 0 2 #/dev/md4 /adatok ext3 defaults 0 2 # GNU/Linux # /dev/sda3 /boot ext3 defaults 0 2 /dev/sda5 none swap sw 0 0 /dev/sda6 / ext3 defaults,errors=remount-ro 0 1 /dev/sda7 /home ext3 defaults 0 2 /dev/sda8 /adatok ext3 defaults 0 2 these abowe corresponds togeather (each - others). -- Regards, Paul Csanyi http://www.freewebs.com/csanyi-pal/index.htm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
