hce wrote:
On 1/8/08, steef <[EMAIL PROTECTED]> wrote:
hce wrote:
Hi,
Is following burn CD command correct? I've got following errors:
$ sudo cdrecord -scanbus
cdrecord: Warning: controller returns wrong size for CD capabilities page.
1,1,0 101) ' ' 'ATAPI CDROM ' '110B' Removable CD-ROM
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
$ sudo cdrecord -v -eject speed=1 dev=1,1,0 cd.iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive
dependent defaults.
cdrecord: Continuing in 5 seconds...
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
cdrecord: Invalid or incomplete multibyte or wide character. Cannot
open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
Thank you.
Jim
hi,
what are you trying to burn: data, i guess? if so: include -data and
-pad. what i remember of cdrecord: you should point to dev=ATAPI:1,1,0 ,
try further with -tao or -dao within the command.
hope this helps.
reg.,
To burn photos (JPG files) in iso. I tried following command, but failed again:
$ sudo cdrecord dev=ATAPI:1,1,0 speed=1 -tao -v -eject cd1.iso
TOC Type: 1 = CD-ROM
scsidev: 'ATAPI:1,1,0'
devname: 'ATAPI'
scsibus: 1 target: 1 lun: 0
Use of ATA is preferred over ATAPI.
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 1
cdrecord: Warning: controller returns wrong size for CD capabilities page.
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : ' '
Identifikation : 'ATAPI CDROM '
Revision : '110B'
Device seems to be: Generic mmc CD-ROM.
cdrecord: Warning: controller returns wrong size for CD capabilities page.
cdrecord: Warning: controller returns wrong size for CD capabilities page.
cdrecord: Warning: controller returns wrong size for CD capabilities page.
cdrecord: Warning: controller returns wrong size for CD capabilities page.
cdrecord: Warning: controller returns wrong size for CD capabilities page.
cdrecord: Sorry, no CD/DVD-Recorder or unsupported CD/DVD-Recorder
found on this target.
cdrecord: Warning: controller returns wron
Thanks steef and hth.
Jim
hi,
cdrecord does not seem to accept your burner.......... strange, but not
unprecedented. i had a comparable problem with an optiac burner last year.
you *could* try to insert -data and -pad on your commandline, but i do
not think that will be much of a difference.
in your position i should install wodim. for me wodim ended these problems.
hth.,
steef
--
drs. steef van duin
publicist, research-journalist
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]