Bernard([EMAIL PROTECTED]) is reported to have said: > Thanks all for your help. > > First, my digital camera works like a charm. > > When I plug my GPS I have only those two lines in /var/log/syslog: > Aug 30 17:23:15 zherc kernel: usb 1-2: new full speed USB device using > uhci_hcd and address 4 > Aug 30 17:23:15 zherc kernel: usb 1-2: configuration #1 chosen from 1 choice > > No /dev/ttyUSB0 > > Also, the module ehci_hcd is already loaded so no need to modprobe it. > > The output of lsusb (after the GPS has been plugged) is the following: > Bus 004 Device 001: ID 0000:0000 > Bus 003 Device 001: ID 0000:0000 > Bus 002 Device 002: ID 046d:c506 Logitech, Inc. MX-700 Cordless Mouse > Receiver > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 004: ID 4348:5523 > Bus 001 Device 001: ID 0000:0000 > > By the way, this is a Garmin GPS III+ if it could help. > > I use a usb-to-serial adapter. Does it need a driver or something? > > Thanks again, > Bernard > > Here is what syslog shows when I plug in my usb GPS puck. > > Aug 30 10:27:15 buddy kernel: usb 1-5.4: new full speed USB device using > > ehci_hcd and address 4 > > Aug 30 10:27:15 buddy kernel: usb 1-5.4: configuration #1 chosen from 1 > > choice > > Aug 30 10:27:15 buddy kernel: pl2303 1-5.4:1.0: pl2303 converter detected > > Aug 30 10:27:15 buddy kernel: usb 1-5.4: pl2303 converter now attached to > > ttyUSB0
Yes! Thats what the "usb 1-5.4: pl2303 converter now attached to ttyUSB0" is. You said you had the converter so I 'thought' (my bad), yu knew that. modprobe pl2303 should do it for you. Wayne -- Don't hit the keys so hard, it hurts. _______________________________________________________ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
