On 8/30/07, Wayne Topa <[EMAIL PROTECTED]> wrote: > > Bernard([EMAIL PROTECTED]) is reported to have said: > > Thanks all for your help. > > > > First, my digital camera works like a charm. > > > > When I plug my GPS I have only those two lines in /var/log/syslog: > > Aug 30 17:23:15 zherc kernel: usb 1-2: new full speed USB device using > > uhci_hcd and address 4 > > Aug 30 17:23:15 zherc kernel: usb 1-2: configuration #1 chosen from 1 > choice > > > > No /dev/ttyUSB0 > > > > Also, the module ehci_hcd is already loaded so no need to modprobe it. > > > > The output of lsusb (after the GPS has been plugged) is the following: > > Bus 004 Device 001: ID 0000:0000 > > Bus 003 Device 001: ID 0000:0000 > > Bus 002 Device 002: ID 046d:c506 Logitech, Inc. MX-700 Cordless Mouse > > Receiver > > Bus 002 Device 001: ID 0000:0000 > > Bus 001 Device 004: ID 4348:5523 > > Bus 001 Device 001: ID 0000:0000 > > > > By the way, this is a Garmin GPS III+ if it could help. > > > > I use a usb-to-serial adapter. Does it need a driver or something? > > > > Thanks again, > > Bernard > > > Here is what syslog shows when I plug in my usb GPS puck. > > > Aug 30 10:27:15 buddy kernel: usb 1-5.4: new full speed USB device > using > > > ehci_hcd and address 4 > > > Aug 30 10:27:15 buddy kernel: usb 1-5.4: configuration #1 chosen from > 1 > > > choice > > > Aug 30 10:27:15 buddy kernel: pl2303 1-5.4:1.0: pl2303 converter > detected > > > Aug 30 10:27:15 buddy kernel: usb 1-5.4: pl2303 converter now attached > to > > > ttyUSB0 > > Yes! Thats what the "usb 1-5.4: pl2303 converter now attached to > ttyUSB0" is. You said you had the converter so I 'thought' (my bad), > yu knew that. > > modprobe pl2303 should do it for you. > > Wayne > > -- > Don't hit the keys so hard, it hurts. > _______________________________________________________ > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > > Not yet.... but I think we are closer to a solution!
modprobe pl2303 says : Aug 30 20:34:17 zherc kernel: usbcore: registered new driver usbserial Aug 30 20:34:17 zherc kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic Aug 30 20:34:17 zherc kernel: usbcore: registered new driver usbserial_generic Aug 30 20:34:17 zherc kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core Aug 30 20:34:17 zherc kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303 Aug 30 20:34:17 zherc kernel: usbcore: registered new driver pl2303 Aug 30 20:34:17 zherc kernel: drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver modprobe garmin_gps says: Aug 30 20:34:33 zherc kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Garmin GPS usb/tty Aug 30 20:34:33 zherc kernel: usbcore: registered new driver garmin_gps Aug 30 20:34:33 zherc kernel: drivers/usb/serial/garmin_gps.c: garmin gps driver v0.23 No ttyUSB? yet! What else could be missing? I remember to have read on the net that some usb to serial adapter might be at problem. Maybe it's the problem. I'll try to borrow the cable of a friend. Thanks for the help everybody, Bernard
