On Thu, May 17, 2007 at 02:30:37PM +0200, Bruno Costacurta wrote: > On Wednesday 16 May 2007 22:52:13 Roberto C. Sánchez wrote: > > On Wed, May 16, 2007 at 02:29:10PM +0200, Bruno Costacurta wrote: > > > > > > I intend to install LVM and RAID-1 on a two disks system. > > > Is there any order or procedure to respect when installing both together > > > ? Some HOWTO or README somewhere about this ? > > > > I managed to install RAID-1 via manual option of the Etch installer > as I found the following useful reference : > http://ads.wars-nicht.de/blog/archives/54-Install-Debian-Etch-on-a-Software-Raid-1-with-S-ATA-disks.html > > Looks ok for RAID-1. Now I'll try to install LVM and will post the result.
Hint: raid1 mirrors two disks to create one volume. LVM will then divy up that volume. So in the installer, set the disk/partition to use as physical volume for software raid, then configure raid. Then you have md0 which you mark use as physical volume for LVM, then you configure LVM. Doug. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
