On Thursday 17 May 2007 22:31, Douglas Allan Tutty wrote: > On Thu, May 17, 2007 at 02:30:37PM +0200, Bruno Costacurta wrote: > > On Wednesday 16 May 2007 22:52:13 Roberto C. Sánchez wrote: > > > On Wed, May 16, 2007 at 02:29:10PM +0200, Bruno Costacurta wrote: > > > > I intend to install LVM and RAID-1 on a two disks system. > > > > Is there any order or procedure to respect when installing both > > > > together ? Some HOWTO or README somewhere about this ? > > > > I managed to install RAID-1 via manual option of the Etch installer > > as I found the following useful reference : > > http://ads.wars-nicht.de/blog/archives/54-Install-Debian-Etch-on-a-Softwa > >re-Raid-1-with-S-ATA-disks.html > > > > Looks ok for RAID-1. Now I'll try to install LVM and will post the > > result. > > Hint: > > raid1 mirrors two disks to create one volume. LVM will then divy up > that volume. So in the installer, set the disk/partition to use as > physical volume for software raid, then configure raid. Then you have > md0 which you mark use as physical volume for LVM, then you configure > LVM. > > Doug.
Thanks. I completed RAID1 installation via installer but without selecting LVM. Is it possible to setup LVM once RAID1 is built and system up ? Bye, Bruno
