Hello list,
I just upgraded from sarge to etch using apt-get dist-upgrade. I have a few
problems. The OS won't completely start. I made a complete capture of the
console output, if anybody is kind enough to try to understand what is
happening and help me.
Linux version 2.6.18-4-686 (Debian 2.6.18.dfsg.1-12) ([EMAIL PROTECTED]) (gcc
version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Mar 26
17:17:36 UTC 2007BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 -
000000000009d400 (usable) BIOS-e820: 000000000009d400 - 00000000000a0000
(reserved) BIOS-e820: 00000000000e4400 - 0000000000100000 (reserved) BIOS-e820:
0000000000100000 - 000000004fff0000 (usable) BIOS-e820: 000000004fff0000 -
000000004ffffc00 (ACPI data) BIOS-e820: 000000004ffffc00 - 0000000050000000
(ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820:
00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 -
0000000100000000 (reserved)383MB HIGHMEM available.896MB LOWMEM available.found
SMP MP-table at 000f6900DMI 2.3 present.ACPI: PM-Timer IO Port: 0x404ACPI:
LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)Processor #0 6:8 APIC version
17ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)Processor #3 6:8 APIC
version 17ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])ACPI: LAPIC_NMI
(acpi_id[0x01] high edge lint[0x1])ACPI: IOAPIC (id[0x04] address[0xfec00000]
gsi_base[0])IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-15ACPI:
IOAPIC (id[0x05] address[0xfec01000] gsi_base[16])IOAPIC[1]: apic_id 5, version
17, address 0xfec01000, GSI 16-31ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq
31 low level)Enabling APIC mode: Flat. Using 2 I/O APICsUsing ACPI (MADT) for
SMP configuration informationAllocating PCI resources starting at 60000000
(gap: 50000000:aec00000)Detected 999.840 MHz processor.Built 1 zonelists.
Total pages: 327664Kernel command line: root=/dev/sda1 ro console=tty0
console=ttyS1,57600n8 Enabling fast FPU save and restore... done.Enabling
unmasked SIMD FPU exception support... done.Initializing CPU#0PID hash table
entries: 4096 (order: 12, 16384 bytes)Console: colour VGA+ 80x25Dentry cache
hash table entries: 131072 (order: 7, 524288 bytes)Inode-cache hash table
entries: 65536 (order: 6, 262144 bytes)Memory: 1290548k/1310656k available
(1544k kernel code, 18860k reserved, 577k data, 196k init, 393152k
highmem)Checking if this processor honours the WP bit even in supervisor
mode... Ok.Calibrating delay using timer specific routine.. 2000.58 BogoMIPS
(lpj=4001174)Security Framework v1.0.0 initializedSELinux: Disabled at
boot.Capability LSM initializedMount-cache hash table entries: 512CPU: L1 I
cache: 16K, L1 D cache: 16KCPU: L2 cache: 256KIntel machine check architecture
supported.Intel machine check reporting enabled on CPU#0.Compat vDSO mapped to
ffffe000.Checking 'hlt' instruction... OK.SMP alternatives: switching to UP
codeACPI: Core revision 20060707CPU0: Intel Pentium III (Coppermine) stepping
0aSMP alternatives: switching to SMP codeBooting processor 1/0 eip
3000Initializing CPU#1Calibrating delay using timer specific routine.. 1999.60
BogoMIPS (lpj=3999219)CPU: L1 I cache: 16K, L1 D cache: 16KCPU: L2 cache:
256KIntel machine check architecture supported.Intel machine check reporting
enabled on CPU#1.CPU1: Intel Pentium III (Coppermine) stepping 0aTotal of 2
processors activated (4000.19 BogoMIPS).ENABLING IO-APIC IRQs..TIMER:
vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1checking TSC synchronization across
2 CPUs: passed.Brought up 2 CPUsmigration_cost=821checking if image is
initramfs... it isFreeing initrd memory: 5100k freedNET: Registered protocol
family 16ACPI: bus type pci registeredPCI: PCI BIOS revision 2.10 entry at
0xfdb57, last bus=3PCI: Using configuration type 1Setting up standard PCI
resourcesACPI: Interpreter enabledACPI: Using IOAPIC for interrupt routingACPI:
PCI Interrupt Link [IR1] (IRQs 5 10) *9ACPI: PCI Interrupt Link [LN0E] (IRQs
*14)ACPI: PCI Interrupt Link [LN10] (IRQs *16)ACPI: PCI Interrupt Link [LN11]
(IRQs *17)ACPI: PCI Interrupt Link [LN12] (IRQs *18)ACPI: PCI Interrupt Link
[LN13] (IRQs *19)ACPI: PCI Interrupt Link [LN14] (IRQs *20)ACPI: PCI Interrupt
Link [LN15] (IRQs *21)ACPI: PCI Interrupt Link [LN16] (IRQs *22)ACPI: PCI
Interrupt Link [LN17] (IRQs *23)ACPI: PCI Interrupt Link [LN18] (IRQs *24)ACPI:
PCI Interrupt Link [LN19] (IRQs *25)ACPI: PCI Interrupt Link [LN1A] (IRQs
*26)ACPI: PCI Interrupt Link [LN1B] (IRQs *27)ACPI: PCI Interrupt Link [LN1C]
(IRQs *28)ACPI: PCI Interrupt Link [LN1D] (IRQs *29)ACPI: PCI Root Bridge
[PCI0] (0000:00)PCI: Firmware left 0000:00:03.0 e100 interrupts enabled,
disablingPCI: Firmware left 0000:00:07.0 e100 interrupts enabled, disablingPCI:
Firmware left 0000:02:04.0 e100 interrupts enabled, disablingPCI: Firmware left
0000:02:05.0 e100 interrupts enabled, disablingACPI: Embedded Controller [EC0]
(gpe 4) interrupt mode.ACPI: PCI Root Bridge [PCI1] (0000:03)ACPI: Power
Resource [FN10] (off)ACPI: Power Resource [FN11] (off)Linux Plug and Play
Support v0.97 (c) Adam Belaypnp: PnP ACPI initpnp: PnP ACPI: found 15
devicesPnPBIOS: Disabled by ACPI PNPPCI: Using ACPI for IRQ routingPCI: If a
device doesn't work, try "pci=routeirq". If it helps, post a reportpnp: 00:0b:
ioport range 0x400-0x40a could not be reservedpnp: 00:0b: ioport range
0x40c-0x417 could not be reservedpnp: 00:0b: ioport range 0x418-0x418 has been
reservedpnp: 00:0c: ioport range 0x580-0x58d has been reservedpnp: 00:0c:
ioport range 0x40b-0x40b has been reservedpnp: 00:0c: ioport range 0x419-0x41b
has been reservedpnp: 00:0c: ioport range 0x41d-0x41f has been reservedpnp:
00:0c: ioport range 0x4d0-0x4d1 has been reservedpnp: 00:0c: ioport range
0x4d6-0x4d6 has been reservedpnp: 00:0c: ioport range 0xc00-0xc01 has been
reservedPCI: Bridge: 0000:00:08.0 IO window: 2000-2fff MEM window:
f9300000-f93fffff PREFETCH window: 60100000-601fffffPCI: Bridge: 0000:00:09.0
IO window: 3000-3fff MEM window: f9400000-f96fffff PREFETCH window:
disabled.NET: Registered protocol family 2IP route cache hash table entries:
32768 (order: 5, 131072 bytes)TCP established hash table entries: 131072
(order: 8, 1048576 bytes)TCP bind hash table entries: 65536 (order: 7, 524288
bytes)TCP: Hash tables configured (established 131072 bind 65536)TCP reno
registeredSimple Boot Flag at 0x7d set to 0x1audit: initializing netlink socket
(disabled)audit(1176180960.436:1): initializedhighmem bounce pool size: 64
pagesVFS: Disk quotas dquot_6.5.1Dquot-cache hash table entries: 1024 (order 0,
4096 bytes)Initializing Cryptographic APIio scheduler noop registeredio
scheduler anticipatory registeredio scheduler deadline registeredio scheduler
cfq registered (default)isapnp: Scanning for PnP cards...isapnp: No Plug & Play
device foundSerial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabledserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550Aserial8250: ttyS1 at
I/O 0x2f8 (irq = 3) is a 16550A00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a
16550A00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550ARAMDISK driver
initialized: 16 RAM disks of 8192K size 1024 blocksizePNP: PS/2 Controller
[PNP0303:KBC0,PNP0f13:MSC0] at 0x60,0x64 irq 1,12serio: i8042 AUX port at
0x60,0x64 irq 12serio: i8042 KBD port at 0x60,0x64 irq 1mice: PS/2 mouse device
common for all miceTCP bic registeredNET: Registered protocol family 1NET:
Registered protocol family 17NET: Registered protocol family 8NET: Registered
protocol family 20Starting balanced_irqUsing IPI No-Shortcut modeACPI:
(supports S0 S1<6>Time: tsc clocksource has been installed. S4 S5)Freeing
unused kernel memory: 196k freedLoading, please wait...Begin: Loading essential
drivers... ...Done.Begin: Running /scripts/init-premount ...ACPI: Transitioning
device [FN1] to D3ACPI: Transitioning device [FN1] to D3ACPI: Fan [FN1]
(off)ACPI: Transitioning device [FN2] to D3ACPI: Transitioning device [FN2] to
D3ACPI: Fan [FN2] (off)ACPI: Thermal Zone [TZC0] (39 C)ACPI: Thermal Zone
[TZC1] (45 C)ACPI: Thermal Zone [TZE0] (35 C)Uniform Multi-Platform E-IDE
driver Revision: 7.00alpha2ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xxe100: Intel(R) PRO/100 Network Driver,
3.5.10-k2-NAPIe100: Copyright(c) 1999-2005 Intel CorporationACPI: PCI Interrupt
0000:00:03.0[A] -> GSI 18 (level, low) -> IRQ 185e100: eth0: e100_probe: addr
0xf9001000, irq 185, MAC addr 00:D0:B7:B6:FF:B0ACPI: PCI Interrupt
0000:00:07.0[A] -> GSI 23 (level, low) -> IRQ 193e100: eth1: e100_probe: addr
0xf9003000, irq 193, MAC addr 00:04:AC:E3:5D:80ACPI: PCI Interrupt
0000:02:04.0[A] -> GSI 25 (level, low) -> IRQ 201e100: eth2: e100_probe: addr
0xf9500000, irq 201, MAC addr 00:02:A5:89:6F:9CACPI: PCI Interrupt
0000:02:05.0[A] -> GSI 28 (level, low) -> IRQ 209e100: eth3: e100_probe: addr
0xf9501000, irq 209, MAC addr 00:02:A5:89:6F:9Dusbcore: registered new driver
usbfsusbcore: registered new driver hubIntel(R) PRO/1000 Network Driver -
version 7.1.9-k4-NAPICopyright (c) 1999-2006 Intel Corporation.ACPI: PCI
Interrupt 0000:03:0a.0[A] -> GSI 20 (level, low) -> IRQ 217SCSI subsystem
initializedThunderLAN driver v1.15ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 24
(level, low) -> IRQ 225TLAN: eth4 irq=225, io=2000, Compaq Netelligent Dual
10/100 TX PCI UTP, Rev. 16ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 29 (level,
low) -> IRQ 233TLAN: eth5 irq=233, io=2010, Compaq Netelligent Dual 10/100 TX
PCI UTP, Rev. 16ACPI: PCI Interrupt Link [IR1] enabled at IRQ 10ACPI: PCI
Interrupt 0000:00:0f.2[A] -> Link [IR1] -> GSI 10 (level, low) -> IRQ
10ohci_hcd 0000:00:0f.2: OHCI Host Controllerohci_hcd 0000:00:0f.2: new USB bus
registered, assigned bus number 1ohci_hcd 0000:00:0f.2: irq 10, io mem
0xf9004000e1000: 0000:03:0a.0: e1000_probe: (PCI:33MHz:64-bit)
00:07:e9:00:04:1eusb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0:
USB hub foundhub 1-0:1.0: 2 ports detectede1000: eth6: e1000_probe: Intel(R)
PRO/1000 Network ConnectionTLAN: 2 devices installed, PCI: 2 EISA: 0ACPI: PCI
Interrupt 0000:03:0b.0[A] -> GSI 21 (level, low) -> IRQ 50ACPI: PCI Interrupt
0000:00:06.0[A] -> GSI 26 (level, low) -> IRQ 58ata1: SATA max UDMA/100 cmd
0xF8802080 ctl 0xF880208A bmdma 0xF8802000 irq 58ata2: SATA max UDMA/100 cmd
0xF88020C0 ctl 0xF88020CA bmdma 0xF8802008 irq 58scsi1 : IBM PCI ServeRAID
7.12.05 Build 761 <ServeRAID 4H> Vendor: IBM Model: SERVERAID
Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02
Vendor: IBM Model: SERVERAID Rev: 1.00 Type: Processor
ANSI SCSI revision: 02scsi0 : sata_silSCSI device sda:
284518400 512-byte hdwr sectors (145673 MB)sda: assuming Write Enabledsda:
assuming drive cache: write throughSCSI device sda: 284518400 512-byte hdwr
sectors (145673 MB)sda: assuming Write Enabledsda: assuming drive cache: write
through sda: sda1 sda2 sda3 sda4 < sda5 >sd 1:0:0:0: Attached scsi disk
sdaata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)ata1.00: ATA-7, max
UDMA7, 488397168 sectors: LBA48 NCQ (depth 0/32)ata1.00: ata1: dev 0 multi
count 16ata1.00: configured for UDMA/100scsi2 : sata_silata2: SATA link up 1.5
Gbps (SStatus 113 SControl 310)ata2.00: ATA-7, max UDMA7, 488397168 sectors:
LBA48 NCQ (depth 0/32)ata2.00: ata2: dev 0 multi count 16ata2.00: configured
for UDMA/100 Vendor: ATA Model: SAMSUNG SP2504C Rev: VT10 Type:
Direct-Access ANSI SCSI revision: 05SCSI device sdb:
488397168 512-byte hdwr sectors (250059 MB)sdb: Write Protect is offSCSI device
sdb: drive cache: write backSCSI device sdb: 488397168 512-byte hdwr sectors
(250059 MB)sdb: Write Protect is offSCSI device sdb: drive cache: write back
sdb: sdb1sd 0:0:0:0: Attached scsi disk sdb Vendor: ATA Model: SAMSUNG
SP2504C Rev: VT10 Type: Direct-Access ANSI SCSI
revision: 05SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)sdc:
Write Protect is offSCSI device sdc: drive cache: write backSCSI device sdc:
488397168 512-byte hdwr sectors (250059 MB)sdc: Write Protect is offSCSI device
sdc: drive cache: write back sdc: sdc1sd 2:0:0:0: Attached scsi disk sdcSvrWks
OSB4: IDE controller at PCI slot 0000:00:0f.1SvrWks OSB4: chipset revision
0SvrWks OSB4: not 100% native mode: will probe irqs later ide0: BM-DMA at
0x1490-0x1497, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at
0x1498-0x149f, BIOS settings: hdc:DMA, hdd:DMAhda: LITE-ON DVD SHD-16P1S, ATAPI
CD/DVD-ROM drivehdb: MATSHITA CR-176, ATAPI CD/DVD-ROM driveide0 at
0x1f0-0x1f7,0x3f6 on irq 14hda: ATAPI 48X DVD-ROM drive, 1725kB Cache,
(U)DMAUniform CD-ROM driver Revision: 3.20hdb: ATAPI 24X CD-ROM drive, 128kB
Cache, (U)DMADone.Begin: Mounting root file system... ...Begin: Running
/scripts/local-top ...Begin: Loading MD modules ...Done.device-mapper: ioctl:
4.7.0-ioctl (2006-06-24) initialised: [EMAIL PROTECTED]: Running
/scripts/local-premount ...Done.EXT3-fs: INFO: recovery required on readonly
filesystem.EXT3-fs: write access will be enabled during recovery.kjournald
starting. Commit interval 5 secondsEXT3-fs: recovery complete.EXT3-fs: mounted
filesystem with ordered data mode.Begin: Running /scripts/local-bottom
...Done.Done.Begin: Running /scripts/init-bottom ...Done.
INIT: version 2.86 bootingSetting hostname to 'ironmaiden'...done.Starting the
hotplug events dispatcher: udevd.Synthesizing the initial hotplug
events...done.Waiting for /dev to be fully populated...sd 1:0:0:0: Attached
scsi generic sg0 type 0scsi 1:0:15:0: Attached scsi generic sg1 type 3sd
0:0:0:0: Attached scsi generic sg2 type 0sd 2:0:0:0: Attached scsi generic sg3
type 0input: PC Speaker as /class/input/input0pci_hotplug: PCI Hot Plug PCI
Core version: 0.5shpchp: Standard Hot Plug PCI Controller Driver version:
0.4pnp: Device 00:04 activated.parport: PnPBIOS parport detected.parport0:
PC-style at 0x378 (0x778), irq 7, dma 1
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]Linux agpgart interface v0.101 (c) Dave
JonesReal Time Clock Driver v1.12acFloppy drive(s): fd0 is 1.44MFDC 0 is a
National Semiconductor PC87306agpgart: unable to determine aperture
size.agpgart: agp_backend_initialize() failed.agpgart-serverworks: probe of
0000:00:00.0 failed with error -22agpgart: unable to determine aperture
size.agpgart: agp_backend_initialize() failed.agpgart-serverworks: probe of
0000:00:00.1 failed with error -22piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0
devicedone.Activating swap:swapon on /dev/sda3Adding 1951888k swap on
/dev/sda3. Priority:-1 extents:1 across:1951888k.Will now check root file
system:fsck 1.40-WIP (14-Nov-2006)[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0
/dev/sda1 /: clean, 9568/490560 files, 149947/979933 blocks (check in 2
mounts).EXT3 FS on sda1, internal journalSetting the system clock..System Clock
set. Local time: Tue Apr 10 04:56:11 UTC 2007.Cleaning up ifupdown....Loading
kernel module ide-cd.Loading kernel module ide-detect.FATAL: Module ide_detect
not found.Loading kernel module ide-disk.Loading kernel module psmouse.Loading
kernel module sd_mod.Loading kernel module fuse.fuse init (API version
7.7)Loading device-mapper support.md: md driver 0.90.3 MAX_MD_DEVS=256,
MD_SB_DISKS=27md: bitmap version 4.39md: md0 stopped.md: bind<sdc1>md:
bind<sdb1>md: raid0 personality registered for level 0md0: setting max_sectors
to 128, segment boundary to 32767raid0: looking at sdb1raid0: comparing
sdb1(244195904) with sdb1(244195904)raid0: ENDraid0: ==> UNIQUEraid0: 1
zonesraid0: looking at sdc1raid0: comparing sdc1(244195904) with
sdb1(244195904)raid0: EQUALraid0: FINAL 1 zonesraid0: done.raid0 : md_size is
488391808 blocks.raid0 : conf->hash_spacing is 488391808 blocks.raid0 : nb_zone
is 1.raid0 : Allocating 4 bytes for hash.Assembling MD array md0...done
(started [2/2]).Generating udev events for MD arrays...done.Setting up LVM
Volume Groups... Reading all physical volumes. This may take a while...
Found volume group "LVM" using metadata type lvm2 2 logical volume(s) in
volume group "LVM" now activeWill now check all file systems.fsck 1.40-WIP
(14-Nov-2006)Checking all file systems.[/sbin/fsck.xfs (1) -- /tmp] fsck.xfs -a
/dev/sda2 /sbin/fsck.xfs: XFS file system.[/sbin/fsck.xfs (1) -- /usr] fsck.xfs
-a /dev/mapper/LVM-usr /sbin/fsck.xfs: XFS file system.[/sbin/fsck.xfs (1) --
/var] fsck.xfs -a /dev/mapper/LVM-var /sbin/fsck.xfs: XFS file
system.[/sbin/fsck.xfs (1) -- /var/storage/archival] fsck.xfs -a /dev/md0
/sbin/fsck.xfs: XFS file system.Done checking file systems. A log is being
saved in /var/log/fsck/checkfs if that location is writable.Setting kernel
variables...done.Will now mount local filesystems:SGI XFS with ACLs, security
attributes, realtime, large block numbers, no debug enabledSGI XFS Quota
Management subsystemXFS mounting filesystem sda2Filesystem "dm-0": Disabling
barriers, not supported by the underlying deviceXFS mounting filesystem
dm-0Filesystem "dm-1": Disabling barriers, not supported by the underlying
deviceXFS mounting filesystem dm-1Filesystem "md0": Disabling barriers, not
supported by the underlying deviceXFS mounting filesystem md0.Will now activate
swapfile swap:done.Cleaning /tmp...done.Cleaning /var/run...done.Cleaning
/var/lock...done.Setting up networking....[33m*[39;49m /etc/network/options
is deprecated (see README.Debian of netbase).Setting up IP spoofing
protection...done (rp_filter).Enabling TCP SYN cookies...done.Enabling packet
forwarding...done.Configuring network interfaces...ip_tables: (C) 2000-2006
Netfilter Core TeamNetfilter messages via NETLINK v0.30.ip_conntrack version
2.4 (8192 buckets, 65536 max) - 224 bytes per conntrackInternet Systems
Consortium DHCP Client V3.0.4Copyright 2004-2006 Internet Systems
Consortium.All rights reserved.For info, please visit
http://www.isc.org/sw/dhcp/
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplexListening on
LPF/eth0/00:d0:b7:b6:ff:b0Sending on LPF/eth0/00:d0:b7:b6:ff:b0Sending on
Socket/fallbackDHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval
6DHCPOFFER from x.x.x.xDHCPREQUEST on eth0 to 255.255.255.255 port 67DHCPACK
from x.x.x.xbound to x.x.x.x -- renewal in 1386 seconds.if-up.d/mountnfs[eth0]:
lock /var/run/network/mountnfs exist, not mountingBridge firewalling
registereddevice eth2 entered promiscuous modeaudit(1176180983.622:2): dev=eth2
prom=256 old_prom=0 auid=4294967295e100: eth2: e100_watchdog: link up, 100Mbps,
full-duplexdevice eth3 entered promiscuous modeaudit(1176180983.698:3):
dev=eth3 prom=256 old_prom=0 auid=4294967295e100: eth3: e100_watchdog: link up,
100Mbps, full-duplexdevice eth1 entered promiscuous
modeaudit(1176180983.774:4): dev=eth1 prom=256 old_prom=0 auid=4294967295e100:
eth1: e100_watchdog: link up, 100Mbps, full-duplexdevice eth4 entered
promiscuous modeaudit(1176180983.846:5): dev=eth4 prom=256 old_prom=0
auid=4294967295device eth5 entered promiscuous modeaudit(1176180983.974:6):
dev=eth5 prom=256 old_prom=0 auid=4294967295bluelan: port 3(eth1) entering
learning statebluelan: port 2(eth3) entering learning statebluelan: port
1(eth2) entering learning state
Waiting for bluelan to get ready (MAXWAIT is 5 sTLAN: eth4: Starting
autonegotiation.econds).TLAN: eth5: Starting autonegotiation.TLAN: Giving
autonegotiation more time.TLAN: Please check that your adapter hasTLAN: been
properly connected to a HUB or Switch.TLAN: Trying to establish link in the
background...TLAN: Giving autonegotiation more time.TLAN: Please check that
your adapter hasTLAN: been properly connected to a HUB or Switch.TLAN: Trying
to establish link in the background...bluelan: topology change detected,
propagatingbluelan: port 3(eth1) entering forwarding statebluelan: topology
change detected, propagatingbluelan: port 2(eth3) entering forwarding
statebluelan: topology change detected, propagatingbluelan: port 1(eth2)
entering forwarding stateif-up.d/mountnfs[bluelan]: lock
/var/run/network/mountnfs exist, not mountinge1000: eth6: e1000_watchdog: NIC
Link is Up 1000 Mbps Full Duplexif-up.d/mountnfs[eth6]: lock
/var/run/network/mountnfs exist, not mountingdone.ironmaiden firewall 1.0
initialisation... loading configuration file: OK flushing tables: OK loading
filter table: setting policies: OK creating and populating custom rule
chains: OK input chain: OK forward chain: OK output chain: OK OK loading nat
table: prerouting chain: OK postrouting chain: OK output chain: OK OK
loading mangle table: input chain: OK forward chain: OK output chain: OK
prerouting chain: OK postrouting chain: OK OKironmaiden firewall readyStarting
portmap daemon....Setting console screen modes and fonts.Initializing random
number generator...done.Recovering nvi editor sessions...none found.Setting up
X server socket directory /tmp/.X11-unix....Setting up ICE socket directory
/tmp/.ICE-unix...BUG: unable to handle kernel NULL pointer dereference at
virtual address 00000060 printing eip:f8bea908*pde = 00000000Oops: 0000 [#1]SMP
Modules linked in: bridge ipt_MASQUERADE xt_limit xt_multiport ipt_LOG
xt_tcpudp xt_state iptable_mangle iptable_nat ip_nat ip_conntrack nfnetlink
iptable_filter ip_tables x_tables xfs raid0 md_mod fuse ide_disk i2c_piix4
sworks_agp psmouse floppy i2c_core rtc evdev agpgart serio_raw parport_pc
parport shpchp pci_hotplug pcspkr sg ext3 jbd mbcache dm_mirror dm_snapshot
dm_mod ide_cd cdrom sd_mod serverworks sata_sil ips libata ohci_hcd tlan
generic scsi_mod e1000 usbcore e100 mii ide_core thermal processor fanCPU:
0EIP: 0060:[<f8bea908>] Not tainted VLIEFLAGS: 00010246 (2.6.18-4-686
#1) EIP is at xfs_inobt_update+0x2b/0x87 [xfs]eax: c1adfd44 ebx: f7d58412
ecx: 275316c0 edx: 00000000esi: df8ffc80 edi: df8ffc7c ebp: 00000000
esp: df8ffb24ds: 007b es: 007b ss: 0068Process mkdir (pid: 3120,
ti=df8fe000 task=dff88000 task.ti=df8fe000)Stack: f798c8c0 00000000 c1adfd44
00040000 f7d58412 00040000 f798c8c0 c1adfd44 f8be7f2d df8ffc80 df8ffc7c
00000000 00000080 00000000 df85e4b8 1211804e 00000008 00000001 f71e9400
00000000 f7d58400 00000003 00000001 df9ffe20 Call Trace: [<f8be7f2d>]
xfs_dialloc+0x10ce/0x123d [xfs] [<c0183951>] proc_alloc_inode+0x3e/0x63
[<c016eda7>] alloc_inode+0xf2/0x17a [<c016f637>] new_inode+0x24/0x7f
[<c0183cdc>] task_dumpable+0xe/0x37 [<c017bf52>]
inotify_d_instantiate+0x36/0x59 [<c012b583>] get_pid_task+0x5/0xe [<c0183d6d>]
pid_revalidate+0x68/0xd3 [<c0185c7f>] proc_pid_lookup+0x14a/0x177 [<c0165327>]
do_lookup+0x4e/0x135 [<c016db74>] dput+0x1a/0x11b [<f8beee37>]
xfs_ialloc+0x41/0x453 [xfs] [<f8c01561>] xfs_dir_ialloc+0x62/0x241 [xfs]
[<f8c08579>] xfs_mkdir+0x290/0x561 [xfs] [<f8bbe7d7>]
xfs_acl_get_attr+0x3b/0x5c [xfs] [<f8c0f8d8>] xfs_vn_mknod+0x1c0/0x380 [xfs]
[<c0147e1e>] truncate_inode_pages+0x9/0xf [<c016d7fe>] __d_lookup+0x98/0xdb
[<f89c05c6>] ext3_permission+0x0/0xa [ext3] [<c0165571>] permission+0xa3/0xb6
[<c0166814>] __link_path_walk+0x134/0xd1d [<c017122a>]
mntput_no_expire+0x11/0x6a [<f8bea9ee>] xfs_iunlock+0x51/0x6d [xfs]
[<f8c04a5b>] xfs_access+0x34/0x3a [xfs] [<f8c0fdb3>] xfs_vn_permission+0x0/0x13
[xfs] [<f8c0fdc2>] xfs_vn_permission+0xf/0x13 [xfs] [<c0165571>]
permission+0xa3/0xb6 [<c016732c>] __link_path_walk+0xc4c/0xd1d [<f8c0faa2>]
xfs_vn_mkdir+0xa/0xc [xfs] [<c016588e>] vfs_mkdir+0xba/0xf7 [<c0167d56>]
sys_mkdirat+0x87/0xbb [<c0167d99>] sys_mkdir+0xf/0x13 [<c0102c11>]
sysenter_past_esp+0x56/0x79Code: 55 57 56 53 83 ec 10 89 54 24 08 8b 74 24 24
89 04 24 8b 7c 24 28 8b 50 24 8b 40 44 0f c9 89 c5 89 44 24 04 c1 e5 04 8b 44
24 08 <03> 6a 60 0f c8 89 44 24 08 89 45 00 89 f8 89 4d 04 89 f1 0f c9 EIP:
[<f8bea908>] xfs_inobt_update+0x2b/0x87 [xfs] SS:ESP 0068:df8ffb24
/etc/rcS.d/S70x11-common: line 43: 3120 Segmentation fault mkdir -p
$ICE_DIRSetting up X server socket directory /tmp/.X11-unix...<6>e1000: eth6:
e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
I can get the computer to start perfectly if I comment out everything in the
"start" section from /etc/init.d/x11-common and /etc/init.d/xfree86-common
I find it weird that I have a problem from theses files since I don't use x11
at all.
The computer was working perfectly since almost 1 year before the upgrade and
as far as I know there is no hardware problem with it.
Thanks for your time
_________________________________________________________________
Soyez parmi les premiers à essayer Windows Live Mail.
http://ideas.live.com/programpage.aspx?versionId=5d21c51a-b161-4314-9b0e-4911fb2b2e6d
