gustavo halperin schreef: > Hello > > I have the Creative WebCam using the spca5xx driver from > http://mxhaard.free.fr/index.html. Work nice the problem start if I > connect the WebCam to the USB-Hub instead to connect the WebCam directly > to the computer. > If I connect the WebCam to the 4-ports-Hub I get the next messages > (using dmesg): > usb 1-2.3: new full speed USB device using ehci_hcd and address 33 > usb 1-2.3: configuration #1 chosen from 1 choice > /mnt/data1/root/tmp.d/spca5xx-20060501/drivers/usb/spca5xx.c: USB > SPCA5XX camera found. Type Creative Webcam Notebook Zc301+Tas5130c > /mnt/data1/root/tmp.d/spca5xx-20060501/drivers/usb/spca5xx.c: > [spca5xx_probe:5480] Camera type JPEG > /mnt/data1/root/tmp.d/spca5xx-20060501/drivers/usb/zc3xx.h: > [zc3xx_config:487] Find Sensor UNKNOW_0 force Tas5130 > /mnt/data1/root/tmp.d/spca5xx-20060501/drivers/usb/spca5xx.c: > [spca5xx_getcapability:1765] maxw 640 maxh 480 minw 176 minh 144 > > In the other way if I connect the WebCam directly to the computer the > first two lines are the only difference, see next: > usb 2-1: new full speed USB device using uhci_hcd and address 15 > usb 2-1: configuration #1 chosen from 1 choice > > Using the 4-port-Hub the mplayer fail open the video device, geting the > next message: > unable to open '/dev/video0': Function not implemented > > So, that is a problem in a spca5xx driver or in the kernel or where ??? > >
It could be an error in your configuration (?). To test whether /dev/video0 (and more) exist you can use the command: xawtv -hwscan -- Eeltje -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
