Hello
I have the Creative WebCam using the spca5xx driver from
http://mxhaard.free.fr/index.html. Work nice the problem start if I
connect the WebCam to the USB-Hub instead to connect the WebCam directly
to the computer.
If I connect the WebCam to the 4-ports-Hub I get the next messages
(using dmesg):
usb 1-2.3: new full speed USB device using ehci_hcd and address 33
usb 1-2.3: configuration #1 chosen from 1 choice
/mnt/data1/root/tmp.d/spca5xx-20060501/drivers/usb/spca5xx.c: USB
SPCA5XX camera found. Type Creative Webcam Notebook Zc301+Tas5130c
/mnt/data1/root/tmp.d/spca5xx-20060501/drivers/usb/spca5xx.c:
[spca5xx_probe:5480] Camera type JPEG
/mnt/data1/root/tmp.d/spca5xx-20060501/drivers/usb/zc3xx.h:
[zc3xx_config:487] Find Sensor UNKNOW_0 force Tas5130
/mnt/data1/root/tmp.d/spca5xx-20060501/drivers/usb/spca5xx.c:
[spca5xx_getcapability:1765] maxw 640 maxh 480 minw 176 minh 144
In the other way if I connect the WebCam directly to the computer the
first two lines are the only difference, see next:
usb 2-1: new full speed USB device using uhci_hcd and address 15
usb 2-1: configuration #1 chosen from 1 choice
Using the 4-port-Hub the mplayer fail open the video device, geting the
next message:
unable to open '/dev/video0': Function not implemented
So, that is a problem in a spca5xx driver or in the kernel or where ???
Thank you very much,
Gustavo
--
||\ // \
| \\ // |
I'm thinking. \ \\ l\\l_ // |
_ _ | \\/ `/ `.| |
/~\\ \ //~\ | Y | | || Y |
| \\ \ // | | \| | |\ / |
[ || || ] \ | o|o | > /
] Y || || Y [ \___\_--_ /_/__/
| \_|l,------.l|_/ | /.-\(____) /--.\
| >' `< | `--(______)----'
\ (/~`--____--'~\) / U// U / \
`-_>-__________-<_-' / \ / /|
/(_#(__)#_)\ ( .) / / ]
\___/__\___/ `.`' / [
/__`--'__\ |`-' |
/\(__,>-~~ __) | |__
/\//\\( `--~~ ) _l |--:.
'\/ <^\ /^> | ` ( < \\
_\ >-__-< /_ ,-\ ,-~~->. \ `:.___,/
(___\ /___) (____/ (____) `---'
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
