> Using Debian command mode 2.6 kernel. > > My NIC keeps jumping around between eth0 and eth1 every so often when I > reboot. It is real annoying! How do I get it to stick to be the same all > the > time? It is conflicting with a firewire controller... >
what i would do if i had this problems is make the NIC are firewire card load as modules then i can put a wait between them, e.g. i would load the NIC when everything is booting and put a sleep and load the firewire modules .. or you could build the NIC into the kernel and load the firewire as modules. just make sure they always get loaded in the same order with a good time gab between them. also i would make sure the nic interface is up apon system boot, if you are using dhcp this might be a problem if your not connected to the network at boot. HTH Matt. > > Tyson Varosyan > Technical Manager, Uptime Technical Solutions LLC. > [EMAIL PROTECTED] > www.up-times.com > 206-715-TECH (8324) > > UpTime/OnTime/AnyTime > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
