On Sat, March 11, 2006 19:02, Todd A. Jacobs said: > Since doing an upgrade to testing, I can no longer burn CDs using any > tool in my arsenal, although DVDs continue to burn correctly. When > trying to burn CDs, I get lots of errors similar to the following: > > cdrecord: Warning: Running on Linux-2.6.15-1-686 > cdrecord: There are unsettled issues with Linux-2.5 and newer. > cdrecord: If you have unexpected problems, please try Linux-2.4 or > Solaris. > TOC Type: 1 = CD-ROM > scsidev: '0,0,0' > scsibus: 0 target: 0 lun: 0 > Linux sg driver version: 3.5.33 > Using libscg version 'schily-0.8'. > SCSI buffer size: 64512 > atapi: 1 > Device type : Removable CD-ROM > Version : 0 > Response Format: 2 > Capabilities : > Vendor_info : '_NEC ' > Identifikation : 'DVD_RW ND-1300A ' > Revision : '1.06' > Device seems to be: Generic mmc2 DVD-R/DVD-RW. > Current: 0x0009 > Profile: 0x001B > Profile: 0x001A > Profile: 0x0014 > Profile: 0x0013 > Profile: 0x0011 > Profile: 0x0010 > Profile: 0x000A > Profile: 0x0009 (current) > Profile: 0x0008 (current) > cdrecord: This version of cdrecord does not include DVD-R/DVD-RW > support code. > cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on > DVD support. > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). > Driver flags : MMC-3 SWABAUDIO BURNFREE > Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R > Drive buf size : 1345536 = 1314 KB > FIFO size : 4194304 = 4096 KB > Track 01: data 3 MB > Total size: 4 MB (00:26.69) = 2002 sectors > Lout start: 4 MB (00:28/52) = 2002 sectors > Current Secsize: 2048 > ATIP info from disk: > Indicated writing power: 5 > Is not unrestricted > Is not erasable > Disk sub type: Medium Type A, low Beta category (A-) (2) > ATIP start of lead in: -11634 (97:26/66) > ATIP start of lead out: 107849 (23:59/74) > Disk type: Short strategy type (Phthalocyanine or similar) > Manuf. index: 3 > Manufacturer: CMC Magnetics Corporation > Blocks total: 107849 Blocks current: 107849 Blocks remaining: 105847 > Starting to write CD/DVD at speed 16 in real TAO mode for single > session. > Last chance to quit, starting real write 0 seconds. Operation > starts. > Waiting for reader process to fill input buffer ... input buffer > ready. > BURN-Free is ON. > Turning BURN-Free off > Performing OPC... > cdrecord: Input/output error. send opc: scsi sendcmd: no error > CDB: 54 01 00 00 00 00 00 00 00 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 03 00 1C A3 80 0A 00 00 00 00 0C 00 00 00 > Sense Key: 0x3 Medium Error, Segment 0 > Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 > Sense flags: Blk 1876864 (not valid) > cmd finished after 2.135s timeout 60s > cdrecord: OPC failed. > Writing time: 2.290s > cdrecord: fifo had 64 puts and 0 gets. > cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. > > The kernel doesn't seem to include modules for ide-scsi anymore, and I > have to manually load sg.o with "sudo modprobe sg" before cdrecord will > even find the device. What's weird, though, is that burning DVDs on the > same device still works. > > What gives? > > -- > Re-Interpreting Historic Miracles with SED #141: %s/water/wine/g > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > >
You just need to use ATAPI, not SCSI. In my cdrecord.conf I have: CDR_DEVICE=cdrom # drive name device speed fifosize driveropts # cdrom= ATAPI:/dev/hdc -1 -1 burnfree -v Then I just do: cdrecord -v -eject myimage.iso -- /ernst-magne If you can't explain it simply, you don't understand it well enough. (Albert Einstein) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
