Got this solved, it helps if I load the modules for my SATA disks first!! Apologies for the posts.
On Sat, 18 Feb 2006 23:17:01 +0000, "Sion Dafydd" <[EMAIL PROTECTED]> said: > Hi! > > I've successfully got Sarge and RAID working when using the following > configuration: boot, swap and root partition as seperate RAID1 > partitions, plus a large partition also as RAID1, all these partitions > are mirrored on two 250 GB drives. I get no problem with this > configuration. > > I've come into posesion of a spare 40 GB drive which I want to use to > hold the boot, swap and root partitions, while the two 250GB disks > mirror one large partition. Well, for some reason using this > configuration /dev/md0 does not get initilaized on boot. When I try to > mount it manually I get a "mount: /dev/md0: can't read superblock" > error. If I run "/etc/init.d/mdadm-raid start" from the command line the > raid array gets initilaized and everything is fine. Anybody know of a > reason/fix for this? > > Regards, > > Sion Dafydd -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
