On Sat, 4 May 2002, Bud Rogers wrote:
> I have a couple of mostly woody boxes. Both have Logitech USB Marble
> Trackman for mice. Both mice work well with 2.2.19 kernels. Yesterday
> I installed kernel-source-2.4.18 on one of the boxes and built a new
> kernel for it. I included all the relevant USB modules when I
> configured the kernel. The new kernel boots fine, X and KDE come up
> fine, but the Trackman doesn't work. AFAICT, I have the same modules
> loaded as with the 2.2. kernel. The only thing I find in dmesg or
> kern.log that seem unusual are the following:
>
> May 3 14:09:24 mug kernel: hub.c: USB new device connect on bus1/1,
> assigned device number 2
> May 3 14:09:24 mug kernel: usb_control/bulk_msg: timeout
> May 3 14:09:24 mug kernel: usb.c: USB device not accepting new
> address=2 (error=-110)
> May 3 14:09:24 mug kernel: hub.c: USB new device connect on bus1/1,
> assigned device number 3
> May 3 14:09:24 mug kernel: usb_control/bulk_msg: timeout
> May 3 14:09:24 mug kernel: usb.c: USB device not accepting new
> address=3 (error=-110)
>
> My wife is also having usb problems with her Mandrake box running a
> 2.4.8 kernel. Are there issues with usb in 2.4? I read everything I
> could find about usb in /usr/src/linux/Documentation and poked around
> the archives a bit, but didn't find anything specific.
>
try www.linux-usb.org
--
Dave Mallery, K5EN (r/h 7.2 krud; debian testing)
PO Box 520; Ramah, NM 87321
no gates .~. running GNU/Linux
no windows... /V\ free at last!
/( )\
^^-^^ (Linux TM Linus Torvalds)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
