I have a couple of mostly woody boxes. Both have Logitech USB Marble Trackman for mice. Both mice work well with 2.2.19 kernels. Yesterday I installed kernel-source-2.4.18 on one of the boxes and built a new kernel for it. I included all the relevant USB modules when I configured the kernel. The new kernel boots fine, X and KDE come up fine, but the Trackman doesn't work. AFAICT, I have the same modules loaded as with the 2.2. kernel. The only thing I find in dmesg or kern.log that seem unusual are the following:
May 3 14:09:24 mug kernel: hub.c: USB new device connect on bus1/1, assigned device number 2 May 3 14:09:24 mug kernel: usb_control/bulk_msg: timeout May 3 14:09:24 mug kernel: usb.c: USB device not accepting new address=2 (error=-110) May 3 14:09:24 mug kernel: hub.c: USB new device connect on bus1/1, assigned device number 3 May 3 14:09:24 mug kernel: usb_control/bulk_msg: timeout May 3 14:09:24 mug kernel: usb.c: USB device not accepting new address=3 (error=-110) My wife is also having usb problems with her Mandrake box running a 2.4.8 kernel. Are there issues with usb in 2.4? I read everything I could find about usb in /usr/src/linux/Documentation and poked around the archives a bit, but didn't find anything specific. -- Bud Rogers <[EMAIL PROTECTED]> http://www.sirinet.net/~budr All things in moderation. And not too much moderation either. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
