On Thu, Dec 13, 2001 at 07:45:54PM -0600, shock wrote: > I just did apt-get install cdrecord. I have an all-SCSI system, so my > SCSI driver is compiled into the kernel. Following is the problem I'm > experiencing: > > [EMAIL PROTECTED]:/etc# cdrecord -scanbus > Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J?rg Schilling > cdrecord: No such file or directory. Cannot open SCSI driver. > cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you > are root. [ snip ] > [EMAIL PROTECTED]:/etc# dmesg | grep CD > Vendor: PLEXTOR Model: CD-R PX-W124TS Rev: 1.05 > Type: CD-ROM ANSI SCSI revision: 02 > Attached scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0 > Uniform CD-ROM driver Revision: 3.12 > > /dev/sr0 is a symbolic link to /dev/scd0. /dev/scd0 appears as follows: > > [EMAIL PROTECTED]:/etc# ls -al /dev/scd0 > crw-r--r-- 1 root root 21, 0 Dec 13 19:54 /dev/scd0 > > Any thoughts or ideas would be appreciated. Thanks!
Ok, you've got SCSI CD-ROM support ... do you have SCSI generic support? "cat /proc/devices" should contain the line "21 sg" in the character devices section. The SCSI generic device files are /dev/sg0, /dev/sg1 ... but their existence doesn't mean much if you aren't running devfs (I guess you aren't based on what you quote in your post). cdrecord needs the generic device driver to send commands to the writer. This used to be more clearly documented in the manpage. -- Nathan Norman - Staff Engineer | A good plan today is better Micromuse Ltd. | than a perfect plan tomorrow. mailto:[EMAIL PROTECTED] | -- Patton
pgptyjPmz8GVA.pgp
Description: PGP signature
