I was adding the ip of my network card in the interfaces ( ifconfig eth0 192.168.0.2) and it returned this message:
SIOCSIFADDR: No such device eth0: Unknown interface: No such device Now, what it can be? Marcel ----- Original Message ----- From: "Antti Tolamo" <[EMAIL PROTECTED]> To: <debian-user@lists.debian.org> Sent: Tuesday, October 09, 2001 1:33 AM Subject: Re: setting up network I don't think you need more than network(in this case 192.168.0.0) and define gateway to DSL router. I'm not sure what 'auto eth0' does, I atleast don't have it with my DSL connection. An example: iface eth0 inet static address 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.254 network 192.168.0.0 gateway 192.168.0.122 DNS entries you put to /etc/resolv.conf if they aren't put there already during installation. On the otherhand, if that DSL router has DHCP server, you can just install dhcp client and get addresseses from there too. Provided of course router has such functionality and it is configured right. And dhcp client is too. I hope this helps. Antti >----- Original Message ----- >From: "Jean-Paul Smets" <[EMAIL PROTECTED]> >To: "Marcel Figuerola Estrada" <[EMAIL PROTECTED]>; ><debian-user@lists.debian.org> >Sent: Monday, October 08, 2001 2:19 PM >Subject: Re: setting up network > > > > Le Lundi 8 Octobre 2001 14:08, Marcel Figuerola Estrada a écrit : > > > Hello, > > > > > > I've just installed debian, and my question is very simple: just, what I > > > have to configure my network card. This is, set my computer private > ip, the > > > gateway, the router ip address and the dns my provider gave me. > > > > > > Thank you! > > > > > > Marcel > > > > You just need to set up the file > > > > /etc/network/interfaces > > ( see man interfaces ) > > > > Here is one example (dhcp) > > > > # automatically added when upgrading > > auto lo > > iface lo inet static > > address 127.0.0.1 > > netmask 255.0.0.0 > > # automatically added when upgrading > > auto eth0 > > iface eth0 inet dhcp > > > > The same with static > > > > # automatically added when upgrading > > auto lo > > iface lo inet static > > address 127.0.0.1 > > netmask 255.0.0.0 > > # automatically added when upgrading > > auto eth0 > > iface eth0 inet static > > address 192.168.0.10 > > netmask 255.255.255.0 > > > > It is also possible to use debconf (forgot how...) > > > > JPS. > > > >-- >To UNSUBSCRIBE, email to [EMAIL PROTECTED] >with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] Antti -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]