Hi list, I am running unstable and yesterday I was attempting to shut down from kdm and my machine froze. Upon rebooting, I had problems with eth0. This is what I used to get on boot:
PCI: Found IRQ 11 for device 00:0a.0 3c59x.c:LK1.1.15 6 June 2001 Donald Becker and others. http://www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 00:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at 0x6c00, 00:10:4b:12:1c:6a, IRQ 11 product code 4e4b rev 00.9 date 10-29-98 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 786d. Enabling bus-master transmits and whole-frame receives. 00:0a.0: scatter/gather enabled. h/w checksums enabled I now get this: PCI: Enabling device 00:0a.0 (0000 -> 0003) PCI: Found IRQ 11 for device 00:0a.0 3c59x.c:LK1.1.15 6 June 2001 Donald Becker and others. http://www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 00:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at 0x6c00, PCI: Setting latency timer of device 00:0a.0 to 64 ff:ff:ff:ff:ff:ff, IRQ 11 product code ffff rev ffff.15 date 15-31-127 Full duplex capable 1024K word-wide RAM 3:5 Rx:Tx split, autoselect/<invalid transceiver> interface. Enabling bus-master transmits and early receives. I then get the error NETDEV WATCHDOG: eth0: transmit timed out can anyone shed some light for me on this problem? TIA -pete
