Well at least we know it's not XMMS. Perhaps a downgrade to 4.0.3 X will restore some stability for you. They don't call it "unstable" for no reason sometimes ;> --mike
On 08 Aug 2001 19:33:34 -0400, Steve Gran wrote: > > On Wed, 08 Aug 2001 12:51:11 Michael Heldebrant wrote: > > Hmmmmm. I've never encountered a sblive, they are pci pnp right? Can I > > see the output of uname -a, /proc/pci and /proc/sound /proc/devices > > output? I don't see anything out of the ordinary in these files. > > uname -a: > Linux gashuffer 2.4.7 #1 Tue Jul 24 14:29:31 EDT 2001 i686 unknown > > /proc/pci: > PCI devices found: > Bus 0, device 0, function 0: > Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] > (rev 196). > Prefetchable 32 bit memory at 0xd0000000 [0xd3ffffff]. > Bus 0, device 1, function 0: > PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x > AGP] (rev 0). > Master Capable. No bursts. Min Gnt=12. > Bus 0, device 7, function 0: > ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev > 64). > Bus 0, device 7, function 1: > IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6). > Master Capable. Latency=32. > I/O at 0xd000 [0xd00f]. > Bus 0, device 7, function 2: > USB Controller: VIA Technologies, Inc. UHCI USB (rev 22). > IRQ 5. > Master Capable. Latency=32. > I/O at 0xd400 [0xd41f]. > Bus 0, device 7, function 3: > USB Controller: VIA Technologies, Inc. UHCI USB (#2) (rev 22). > IRQ 5. > Master Capable. Latency=32. > I/O at 0xd800 [0xd81f]. > Bus 0, device 7, function 4: > Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev > 64). > IRQ 9. > Bus 0, device 11, function 0: > SCSI storage controller: Adaptec AHA-7850 (rev 1). > IRQ 11. > Master Capable. Latency=32. Min Gnt=4.Max Lat=4. > I/O at 0xdc00 [0xdcff]. > Non-prefetchable 32 bit memory at 0xdb001000 [0xdb001fff]. > Bus 0, device 13, function 0: > Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 8). > IRQ 12. > Master Capable. Latency=32. Min Gnt=2.Max Lat=20. > I/O at 0xe000 [0xe01f]. > Bus 0, device 13, function 1: > Input device controller: Creative Labs SB Live! (rev 8). > Master Capable. Latency=32. > I/O at 0xe400 [0xe407]. > Bus 0, device 15, function 0: > Ethernet controller: 3Com Corporation 3c450 Cyclone/unknown (rev 48). > IRQ 10. > Master Capable. Latency=32. Min Gnt=10.Max Lat=10. > I/O at 0xe800 [0xe87f]. > Non-prefetchable 32 bit memory at 0xdb000000 [0xdb00007f]. > Bus 1, device 0, function 0: > VGA compatible controller: ATI Technologies Inc Rage 128 RF (rev 0). > IRQ 10. > Master Capable. Latency=32. Min Gnt=8. > Prefetchable 32 bit memory at 0xd4000000 [0xd7ffffff]. > I/O at 0xc000 [0xc0ff]. > Non-prefetchable 32 bit memory at 0xd9000000 [0xd9003fff]. > > /proc/sound: > <no such file> > > /proc/devices: > Character devices: > 1 mem > 2 pty > 3 ttyp > 4 ttyS > 5 cua > 6 lp > 7 vcs > 10 misc > 13 input > 14 sound > 21 sg > 99 ppdev > 128 ptm > 136 pts > 162 raw > 180 usb > > Block devices: > 2 fd > 3 ide0 > 7 loop > 8 sd > 11 sr > 22 ide1 > 65 sd > 66 sd > > > > This is all included for completeness at his point - I removed XMMS, and it > the entire sytem hung again, same way. Locked up, no keyboard acces, > nothing. I reran XFree86 -configure, as the X server is the only thing > that has been running each time. I also changed the mouse over from ttyS0 > to ttyS1 (where XFree86 found it this time), and I'm investigating error > messages at X startup - all of them font related, though, so I'm not sure > that they are relevant. Now that I no longer think it's XMMS, I'm sort of > in a quandary. Thanks for your help. > Steve > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >
