On Wed, 08 Aug 2001 11:01:32 Michael Heldebrant wrote:
> What type of soundcard do you have?
> please also show /proc/modules /proc/interrupts /proc/dma and
> /etc/modules.conf
>
I have a soundblaster live card, which has up to now worked just fine. The
support for it is compiled directly into the kernel, as is I think just
about everything else. Here's the output:
/proc/modules:
<blank>
/proc/interrupts:
CPU0
0: 4744298 XT-PIC timer
1: 9160 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 54317 XT-PIC serial
5: 0 XT-PIC usb-uhci, usb-uhci
10: 184236 XT-PIC eth0
11: 34 XT-PIC aic7xxx
12: 81717 XT-PIC EMU10K1
14: 63283 XT-PIC ide0
15: 332 XT-PIC ide1
NMI: 0
/proc/dma:
4: cascade
/etc/modules.conf:
### This file is automatically generated by update-modules
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modutils and read
# the manpage for update-modules.
#
### update-modules: start processing /etc/modutils/0keep
# DO NOT MODIFY THIS FILE!
# This file is not marked as conffile to make sure if you upgrade modutils
# it will be restored in case some modifications have been made.
#
# The keep command is necessary to prevent insmod and friends from ignoring
# the builtin defaults of a path-statement is encountered. Until all other
# packages use the new `add path'-statement this keep-statement is
essential
# to keep your system working
keep
### update-modules: end processing /etc/modutils/0keep
### update-modules: start processing /etc/modutils/actions
# Special actions that are needed for some modules
# The BTTV module does not load the tuner module automatically,
# so do that in here
post-install bttv insmod tuner
post-remove bttv rmmod tuner
### update-modules: end processing /etc/modutils/actions
### update-modules: start processing /etc/modutils/aliases
# Aliases to tell insmod/modprobe which modules to use
# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off # Unix
# alias net-pf-2 off # IPv4
# alias net-pf-3 off # Amateur Radio AX.25
# alias net-pf-4 off # IPX
# alias net-pf-5 off # DDP / appletalk
# alias net-pf-6 off # Amateur Radio NET/ROM
# alias net-pf-9 off # X.25
# alias net-pf-10 off # IPv6
# alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off # Acorn Econet
alias char-major-10-175 agpgart
alias char-major-10-200 tun
alias char-major-81 bttv
alias char-major-108 ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0 loop_gen
alias loop-xfer-3 loop_fish2
alias loop-xfer-gen-10 loop_gen
alias cipher-2 des
alias cipher-3 fish2
alias cipher-4 blowfish
alias cipher-6 idea
alias cipher-7 serp6f
alias cipher-8 mars6
alias cipher-11 rc62
alias cipher-15 dfc2
alias cipher-16 rijndael
alias cipher-17 rc5
### update-modules: end processing /etc/modutils/aliases
### update-modules: start processing /etc/modutils/paths
# This file contains a list of paths that modprobe should scan,
# beside the once that are compiled into the modutils tools
# themselves.
### update-modules: end processing /etc/modutils/paths
### update-modules: start processing /etc/modutils/ppp
alias /dev/ppp ppp_generic
alias char-major-108 ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
### update-modules: end processing /etc/modutils/ppp
### update-modules: start processing /etc/modutils/setserial
#
# This is what I wanted to do, but logger is in /usr/bin, which isn't
loaded
# when the module is first loaded into the kernel at boot time!
#
#post-install serial /etc/init.d/setserial start | logger -p daemon.info -t
"setserial-module reload"
#pre-remove serial /etc/init.d/setserial stop | logger -p daemon.info -t
"setserial-module uload"
post-install serial /etc/init.d/setserial modload > /dev/null 2> /dev/null
pre-remove serial /etc/init.d/setserial modsave > /dev/null 2> /dev/null
### update-modules: end processing /etc/modutils/setserial
### update-modules: start processing /etc/modutils/arch/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc
### update-modules: end processing /etc/modutils/arch/i386
Thanks again, sorry for the length of everything.
Steve
> --mike
> On 07 Aug 2001 22:50:26 -0400, Steve Gran wrote:
> >
> > On Tue, 07 Aug 2001 21:29:22 Eric G. Miller wrote:
> > > On Tue, Aug 07, 2001 at 06:58:41PM -0400, Steve Gran wrote:
> > > > Hello all,
> > > > I've just experienced my first ever system crashes. They were all
> > > within
> > > > the last several days (after an upgrade that included an upgrade of
> > > XMMS),
> > > > and they all happened shortly after opening XMMS. There were only
> > > three
> > > > total, and it's not consistent, but XMMS & X are the only
> consistent
> > > > factors. I saw that someone else was having some problems with
> system
> > > > hangs, and so I regenerated my /etc/X11/XF86Config-4 on the off
> chance
> > > that
> > > > that was it, but it continued. Anybody else having any problems
> with
> > > this?
> > > > I took a look at the bug reports, and saw some related problems,
> but
> > > > nothing that seemed to be this bad - I'm getting total lockups (no
> > > keyboard
> > > > response, even).
> > > > I'm not sure how to troubleshoot - I've looked through the various
> > > logfiles
> > > > in /var/, and it doesn't look like there are any obvious error
> > > messages,
> > > > although I'm kind of a newbie at this. Any responses or
> suggestions
> > > would
> > > > be appreciated. I've only been running Debian for about six
> months,
> > > but
> > > > thisa is the first hang, and (although it was in a sick way nice to
> > > know
> > > > that nothing is perfect) fairly upsetting. In the meantime, I'm
> not
> > > using
> > > > XMMS, to see if my box will hang whithout it.
> > > > Thanks in advance,
> > > > Steve
> > >
> > > Since you say there is nothing in the logs, is doesn't sound like the
> > > kernel crashed. Perhaps just X got frozen? Ctrl-Alt-Backspace is
> > > usually set to kill X.
> > >
> > > Helps if you give info about the type of system and kernel version.
> >
> >
> >
> > Sorry about that - I realized I forgot to put all that information in
> after
> > I sent it off. I'm running Woody on a 2.4.7 kernel. The box is built
> > around a P III chip, with an assortment of hard drives, cd drives,
> SCSI,
> > USB, and so forth. Relevant version numbers:
> > xserver-common 4.0.3-4
> > xserver-xfree86 4.0.3-4
> > libesd0 0.2.22-6
> > libc6 2.2.3-5
> > xmms 1.2.5-1.1
> > Not sure if you'll need anything else. Ctrl-Alt-Backspace would
> ordinarily
> > work just fine, but the keyboard is also locked out - nothing works.
> >
> > Thanks again,
> > Steve
> >
> >
> > --
> > To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> > with a subject of "unsubscribe". Trouble? Contact
> [EMAIL PROTECTED]
> >
> >
>
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact
> [EMAIL PROTECTED]
>
>
