> From: Yildiz, Murat, Sent: Thursday, February 27, 2003 12:06 PM > > I have installed the package and run rescan-scsi-bus.sh: > > Host adapter 1 (aic7xxx) found. > Host adapter 0 (gdth) found. > Scanning for device 0 0 0 0 ... > OLD: Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: ICP Model: Host Drive #00 Rev: > Type: Direct-Access ANSI SCSI revision: 02 > Scanning for device 0 0 1 0 ... > OLD: Host: scsi0 Channel: 00 Id: 01 Lun: 00 > Vendor: ICP Model: Host Drive #01 Rev: > Type: Direct-Access ANSI SCSI revision: 02 > 0 new device(s) found. > 0 device(s) removed. > > > It couldn't detect the tape drive connected to aic7xxx.Is > there anything > else I can check? >
Totally not my area of expertise... Are you using a stock kernel? If so, there is a file called /boot/config-`uname -r` Look in there to see if you have a kernel compiled with support for the SCSI device you have. I'd try grepping for the string AIC, but I do not know if that is right. Also grep for "SCSI" ------------------------------------------------------------------------------ This message is intended only for the personal and confidential use of the designated recipient(s) named above. If you are not the intended recipient of this message you are hereby notified that any review, dissemination, distribution or copying of this message is strictly prohibited. This communication is for information purposes only and should not be regarded as an offer to sell or as a solicitation of an offer to buy any financial product, an official confirmation of any transaction, or as an official statement of Lehman Brothers. Email transmission cannot be guaranteed to be secure or error-free. Therefore, we do not represent that this information is complete or accurate and it should not be relied upon as such. All information is subject to change without notice. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
