I also have this card and have the same problem. I use the driver disk came with the card. When I type "make", I can't build the files, tulip.o and pci-scan.o. Anyone knows what wrong with it?
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Friday, February 23, 2001 4:06 PM To: debian-user@lists.debian.org Cc: debian-user@lists.debian.org Subject: Re: Debian 2.2 and Linksys LNE100TX - problems I have the same card. It needs the newer tulip. Install w/o network cards install the kernal src and c/c++ take the tar off the driver disk that came with the card build according to instructions from vendor copy tulip.o and pciscan.o (scan-pci?) over those in /lib/modules/2.2.18pre21/net manualy and the alias in modules and insmod the modules :) On Fri, 23 Feb 2001, Jason Price wrote: > I am installing Debian 2.2 for the first time (on a dual cpu box) and > have run into a problem with my NIC. I have a Linksys LNE100TX, which > I understand uses the Tulip module. During setup, I tried to select > the Tulip module to install, but I got an error saying that the "device > is busy" and something about IRQ and IO (not at home right now). Am I > missing somethere here? How can I get this card installed? > > I will be compiling a new kernel to add SMP support - when I do, is > there anything special I will need to do to make sure the NIC works? > > I'm a new Linux user, so be gentle... :) > > Jason > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
