Erm - people... MS Proxy is not a firewall in itself. Perhaps the NT
machine that runs Proxy also has a modem/other device in it, in which case
it is doing firewall-style duties (perish the thought though... an NT based
firewall)
Whereas if you have another device controlling your link, then use that
device's IP as your default gateway. You may need to configure said device
to accept/route/proxy/etc your IP.
Look at [start] --> settings --> control panel --> Network then click on
the /Protocols\ tab then double click "TCP/IP" then click on the /Gateway\
tab then note the IP for the gateway. There may be more than one, but the
top one is the primary.
Then go to your debian machine, and edit /etc/networks/interfaces
Mine looks like this
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
iface lo inet loopback
# The first network card - this entry was created during the
Debian installation
# (network, broadcast and gateway are optional)
iface eth0 inet static
address 192.168.1.2
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
(yes - that third paragraph was a dig at NT toadies, and I have two of the
bloody things at work.)
At 11:03 AM 7/5/00 +1000, you wrote:
I've been fiddling with getting through a MS Proxy from a debian box
in the last few days, and the ease of getting through it greatly depends
on the proxy configuration. I believe our proxy is set up to only let
through
http traffic. Any other protocol that gets through therefore 'pretends'
to be
talking http. I have not yet found a way to telnet out in this manner (but a
windows machine can telnet using the MS Proxy client, so it must be possible
_somehow_). I have however had greater success with lftp, which happens
to be
available as a debian package of the same name.
However .. if you have the options of doing socks, I would certainly
recommend that
as the better option. I just wish I had that choice :)
- Chris Kenrick
(Shaun wrote...)
Another option might be dante-clients.
>
> > Have to either choose to stick with this POS dial-up connection
> > and pay the $20/month, or get better bandwidth for free and
> > figure how to work around that evil program......
>
> M$ Proxy offer socks4 server - You can use this support with the sockified
> versions of ftp and telnet :
>
> <http://www.socks.nec.com/>http://www.socks.nec.com/
>
>
>
>
> Davide
>
> --
> Feel free, feel Debian !
>
>
>
>
> --
> Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED]
< /dev/null
--
-- Shaul Karl <[EMAIL PROTECTED]>
--
-- Shaul Karl <[EMAIL PROTECTED]>