> > Whereas if you have another device controlling your link, > then use that > device's IP as your default gateway. You may need to > configure said device > to accept/route/proxy/etc your IP. > > Look at [start] --> settings --> control panel --> Network > then click on > the /Protocols\ tab then double click "TCP/IP" then click on > the /Gateway\ > tab then note the IP for the gateway. There may be more than > one, but the > top one is the primary. > > Then go to your debian machine, and edit /etc/networks/interfaces > > Mine looks like this > # /etc/network/interfaces -- configuration file for > ifup(8), ifdown(8) > # The loopback interface > iface lo inet loopback > # The first network card - this entry was created during the > Debian installation > # (network, broadcast and gateway are optional) > iface eth0 inet static > address 192.168.1.2 > netmask 255.255.255.0 > network 192.168.1.0 > broadcast 192.168.1.255 > gateway 192.168.1.1 > > (yes - that third paragraph was a dig at NT toadies, and I > have two of the > bloody things at work.) > >
There is DHCP in our network. I try to use dante-clients but that don't work, I'm not sure with configuration. Michal
