Hello, I had the same problem. Then I have used for every Serial Port a seperatly pair od IO/IRQ and now it works.
But you need a serial card where you have enough IO and IRQ's I can set up on my serial card 32 different IO's and all IRQ's. Webmistress Michelle At 10:09 10.08.1999 +0200, you wrote --------> This was the original Message: MK> MK>Howdy, MK> MK>I added a board with 4 serial ports to my PC. I can access the MK>first two serial ports on that board but I do not succeed in connecting MK>to the other 2 ports. I added support for more then 4 serial ports MK>to the kernel and I added some setserial lines to /etc/rc.boot/0setserial MK>but it still doesn't seem to work. When I boot Linux I get a message MK>stating: MK> MK>Serial driver version 4.27 with MANY_PORTS SHARE_IRQ enabled MK>ttyS00 at 0x03f8 (irq = 4) is a 16550A MK>ttyS01 at 0x02f8 (irq = 3) is a 16550A MK>ttyS02 at 0x03e8 (irq = 4) is a 16550A MK>ttyS03 at 0x02e8 (irq = 3) is a 16550A MK> MK>Should I do anything special to use the next 2 serial ports? I couldn't MK>find anything in the serial-HOWTO. MK> MK>Thanks in advance, MK> MK>Nico MK> MK>-- MK>-------------------------------------------------------- MK>How do you tell when you run out of invisible ink? MK>-------------------------------------------------------- MK>Nico De Ranter MK>Sony Service Center (SUPC-E/NSSE) MK>Sint Stevens Woluwestraat 55 (Rue de Woluwe-Saint-Etienne) MK>1130 Brussel (Bruxelles), Belgium, Europe, Earth MK>Telephone: +32 2 724 86 41 Telefax: +32 2 726 26 86 MK>e-mail: [EMAIL PROTECTED] MK> MK> MK>-- MK>Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null MK> MK> MK> --------> The Reply begins here:
