Hi folks,
I'm a newbie Debian user, running Woody, and I'm having some problems
using X Windows, so to say. I don't know exactly if this is the right
place to post this message, that's why I will highly appreciate any
pointer which will help.
The summary of the problems is as follows:
I can not get, under X Windows, both 3D acceleration and xawtv, at the
same time.
- I mean, when I have 3D acceleration, if I start xawtv, my computer
crashes big time. Only a hard reset it's reviving it.
In this case, before I start xawtv, glxgears shows an average rate of
410 fps.
The file XFree86.txt contains the log generated by X. It should be
mentioned here, my video card is the AGP model, and, even when agpgart
_module_ is loaded before I start X, X is not using it.
- OTOH if I disable 3D acceleration I can have the TV. In this case when
I use full screen mode a thick border is surrounding the TV window and
glxgears shows only 120 fps.
I'm using the hardware listed in lspci.txt.
The output of uname -a command is:
Linux morphosys 2.4.20-686-smp #2 SMP Sun Dec 1 13:37:59 EST 2002 i686
unknown.
The kernel used is a debian genuine initrd image.
What I need:
To run both accelerated server and to have a full screen TV, (without
the black border around the TV window) at the same time.
I have read a lot of docs, I googled a lot, but I had no success. I
found some references regarding the behaviour mentioned above but with
no solutions. I know my hardware is a tricky one, but I really need to
get it up and working.
Some extra comments:
I used latest Knoppix CD to test my computer configuration and I
obtained both 3D acceleration and TV working at the same time.
I also obtained 760 fps for glxgears. I wonder how can I obtain a
similar result? (During this test apparently glxgears was run from a
ramdisk, so perhaps I will not obtain 760 fps, anyway).
Any hint and/or suggestion will be highly appreciated. Thanks!
Cheers,
Sorin
# Generated by modprobe -c (2.4.19)
path[boot]=/lib/modules/boot
path[toplevel]=/lib/modules/2.4.20-686-smp
path[toplevel]=/lib/modules/2.4
path[kernel]=/lib/modules/kernel
path[fs]=/lib/modules/fs
path[net]=/lib/modules/net
path[scsi]=/lib/modules/scsi
path[block]=/lib/modules/block
path[cdrom]=/lib/modules/cdrom
path[ipv4]=/lib/modules/ipv4
path[ipv6]=/lib/modules/ipv6
path[sound]=/lib/modules/sound
path[fc4]=/lib/modules/fc4
path[video]=/lib/modules/video
path[misc]=/lib/modules/misc
path[pcmcia]=/lib/modules/pcmcia
path[atm]=/lib/modules/atm
path[usb]=/lib/modules/usb
path[ide]=/lib/modules/ide
path[ieee1394]=/lib/modules/ieee1394
path[mtd]=/lib/modules/mtd
# Prune
prune modules.dep
prune modules.generic_string
prune modules.pcimap
prune modules.isapnpmap
prune modules.usbmap
prune modules.parportmap
prune modules.ieee1394map
prune modules.pnpbiosmap
prune System.map
prune .config
prune build
prune vmlinux
prune vmlinuz
prune bzImage
prune zImage
prune .rhkmvtag
# Aliases
alias binfmt-0000 off
alias binfmt-204 binfmt_aout
alias binfmt-263 binfmt_aout
alias binfmt-264 binfmt_aout
alias binfmt-267 binfmt_aout
alias binfmt-387 binfmt_aout
alias binfmt-332 iBCS
alias binfmt--310 binfmt_java
alias block-major-1 rd
alias block-major-2 floppy
alias block-major-3 ide-probe-mod
alias block-major-7 loop
alias block-major-8 sd_mod
alias block-major-9 md
alias block-major-11 sr_mod
alias block-major-13 xd
alias block-major-15 cdu31a
alias block-major-16 gscd
alias block-major-17 optcd
alias block-major-18 sjcd
alias block-major-20 mcdx
alias block-major-22 ide-probe-mod
alias block-major-23 mcd
alias block-major-24 sonycd535
alias block-major-25 sbpcd
alias block-major-26 sbpcd
alias block-major-27 sbpcd
alias block-major-29 aztcd
alias block-major-32 cm206
alias block-major-33 ide-probe-mod
alias block-major-34 ide-probe-mod
alias block-major-37 ide-tape
alias block-major-44 ftl
alias block-major-46 pcd
alias block-major-47 pf
alias block-major-56 ide-probe-mod
alias block-major-57 ide-probe-mod
alias block-major-58 lvm-mod
alias block-major-88 ide-probe-mod
alias block-major-89 ide-probe-mod
alias block-major-90 ide-probe-mod
alias block-major-91 ide-probe-mod
alias block-major-93 nftl
alias block-major-97 pg
alias char-major-4 serial
alias char-major-5 serial
alias char-major-6 lp
alias char-major-9 st
alias char-major-10 off
alias char-major-10-0 busmouse
alias char-major-10-1 off
alias char-major-10-2 msbusmouse
alias char-major-10-3 atixlmouse
alias char-major-10-130 wdt
alias char-major-10-131 wdt
alias char-major-10-135 rtc
alias char-major-10-139 openprom
alias char-major-10-144 nvram
alias char-major-10-157 applicom
alias char-major-10-175 agpgart
alias char-major-10-184 microcode
alias char-major-13 input
alias char-major-13-32 mousedev
alias char-major-14 soundcore
alias char-major-19 cyclades
alias char-major-20 cyclades
alias char-major-21 sg
alias char-major-22 pcxx
alias char-major-23 pcxx
alias char-major-27 ftape
alias char-major-34 scc
alias char-major-35 tclmidi
alias char-major-36 netlink
alias char-major-37 ide-tape
alias char-major-48 riscom8
alias char-major-49 riscom8
alias char-major-57 esp
alias char-major-58 esp
alias char-major-63 kdebug
alias char-major-90 mtdchar
alias char-major-96 pt
alias char-major-99 ppdev
alias char-major-107 3dfx
alias char-major-108 ppp_generic
alias char-major-109 lvm-mod
alias char-major-161 ircomm-tty
alias char-major-171 raw1394
alias char-major-200 vxspec
alias dos msdos
alias dummy0 dummy
alias dummy1 dummy
alias eth0 off
alias iso9660 isofs
alias md-personality-1 linear
alias md-personality-2 raid0
alias md-personality-3 raid1
alias md-personality-4 raid5
alias md-personality-7 multipath
alias net-pf-1 unix
alias net-pf-2 ipv4
alias net-pf-3 off
alias net-pf-4 ipx
alias net-pf-5 appletalk
alias net-pf-6 off
alias net-pf-10 off
alias net-pf-17 af_packet
alias net-pf-19 off
alias netalias-2 ip_alias
alias plip0 plip
alias plip1 plip
alias tunl0 ipip
alias cipcb0 cipcb
alias cipcb1 cipcb
alias cipcb2 cipcb
alias cipcb3 cipcb
alias ppp0 ppp
alias ppp1 ppp
alias scsi_hostadapter off
alias slip0 slip
alias slip1 slip
alias tty-ldisc-1 slip
alias tty-ldisc-3 ppp_async
alias tty-ldisc-11 irtty
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-18 ppp_mppe
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
alias parport_lowlevel parport_pc
alias usbdevfs usbcore
alias char-major-10-200 tun
alias char-major-81 bttv
alias /dev/ppp ppp_generic
alias loop-xfer-gen-0 loop_gen
alias loop-xfer-3 loop_fish2
alias loop-xfer-gen-10 loop_gen
alias cipher-2 des
alias cipher-3 fish2
alias cipher-4 blowfish
alias cipher-6 idea
alias cipher-7 serp6f
alias cipher-8 mars6
alias cipher-11 rc62
alias cipher-15 dfc2
alias cipher-16 rijndael
alias cipher-17 rc5
alias /dev/tts serial
alias /dev/tts/0 serial
alias /dev/tts/1 serial
alias /dev/tts/2 serial
alias /dev/tts/3 serial
alias binfmt-0064 binfmt_aout
# Options
options dummy0 -o dummy0
options dummy1 -o dummy1
options sb io=0x220 irq=7 dma=1 dma16=5 mpu_io=0x330
# Commands
post-install bttv insmod tuner
post-remove bttv rmmod tuner
post-install serial /etc/init.d/setserial modload > /dev/null 2> /dev/null
pre-remove serial /etc/init.d/setserial modsave > /dev/null 2> /dev/null
# Miscellaneous file and directory names
generic_stringfile=/lib/modules/2.4.20-686-smp/modules.generic_string
pcimapfile=/lib/modules/2.4.20-686-smp/modules.pcimap
isapnpmapfile=/lib/modules/2.4.20-686-smp/modules.isapnpmap
usbmapfile=/lib/modules/2.4.20-686-smp/modules.usbmap
parportmapfile=/lib/modules/2.4.20-686-smp/modules.parportmap
ieee1394mapfile=/lib/modules/2.4.20-686-smp/modules.ieee1394map
pnpbiosmapfile=/lib/modules/2.4.20-686-smp/modules.pnpbiosmap
depfile=/lib/modules/2.4.20-686-smp/modules.dep
persistdir=/var/lib/modules/persist
00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev 02) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: e4000000-e7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:07.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at f000 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at e000 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:08.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev 10)
Subsystem: Accton Technology Corporation EN-1207D Fast Ethernet Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at e400 [size=256]
Region 1: Memory at ea000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
00:09.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02)
Subsystem: ATI Technologies Inc: Unknown device 0001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at ea001000 (32-bit, prefetchable) [size=4K]
00:09.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02)
Subsystem: ATI Technologies Inc: Unknown device 0001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at ea002000 (32-bit, prefetchable) [size=4K]
00:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 05)
Subsystem: Creative Labs CT4850 SBLive! Value
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at e800 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.1 Input device controller: Creative Labs SB Live! (rev 05)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Region 0: I/O ports at ec00 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0448
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at d000 [size=256]
Region 2: Memory at e9000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none>
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted
to [EMAIL PROTECTED] Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.17 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Dec 30 20:56:22 2002
(==) Using config file: "/root/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Philips 15A"
(**) | |-->Device "ATI Rage Fury 32Mb"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "microsoft"
(**) XKB: model: "microsoft"
(**) Option "XkbLayout" "gb"
(**) XKB: layout: "gb"
(**) Option "XkbVariant" "nodeadkeys"
(**) XKB: variant: "nodeadkeys"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(WW) Cannot open APM
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.4
XFree86 XInput driver : 0.2
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000602c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:08:0: chip 1113,1211 card 1113,1211 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:09:0: chip 109e,036e card 1002,0001 rev 02 class 04,00,00 hdr 80
(II) PCI: 00:09:1: chip 109e,0878 card 1002,0001 rev 02 class 04,80,00 hdr 80
(II) PCI: 00:0c:0: chip 1102,0002 card 1102,0020 rev 05 class 04,01,00 hdr 80
(II) PCI: 00:0c:1: chip 1102,7002 card 1102,0020 rev 05 class 09,80,00 hdr 80
(II) PCI: 01:00:0: chip 1002,5246 card 1002,0448 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x88 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI: (0:9:0) BrookTree unknown chipset (0x036e) rev 2, Mem @ 0xea001000/12
(--) PCI:*(1:0:0) ATI Rage 128 RF rev 0, Mem @ 0xe4000000/26, 0xe9000000/14, I/O @
0xd000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xea002000 - 0xea002fff (0x1000) MX[B]
[1] -1 0 0xea000000 - 0xea0000ff (0x100) MX[B]
[2] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[3] -1 0 0xe9000000 - 0xe9003fff (0x4000) MX[B](B)
[4] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[5] -1 0 0xea001000 - 0xea001fff (0x1000) MX[B](B)
[6] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[7] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[8] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[9] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[10] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[11] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xea002000 - 0xea002fff (0x1000) MX[B]
[1] -1 0 0xea000000 - 0xea0000ff (0x100) MX[B]
[2] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[3] -1 0 0xe9000000 - 0xe9003fff (0x4000) MX[B](B)
[4] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[5] -1 0 0xea001000 - 0xea001fff (0x1000) MX[B](B)
[6] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[7] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[8] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[9] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[10] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[11] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xea002000 - 0xea002fff (0x1000) MX[B]
[6] -1 0 0xea000000 - 0xea0000ff (0x100) MX[B]
[7] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[8] -1 0 0xe9000000 - 0xe9003fff (0x4000) MX[B](B)
[9] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[10] -1 0 0xea001000 - 0xea001fff (0x1000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[14] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[15] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[16] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[17] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[18] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.1.9
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "pex5"
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension X3D-PEX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "xie"
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XIE
(II) LoadModule: "r128"
(II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) Module r128: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 4.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 6.3.6
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
(II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
ATI Rage 128 Pro PF (AGP), ATI Rage 128 Pro PP (PCI),
ATI Rage 128 Pro PR (PCI), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Rage 128 RF (AGP) found
(II) Loading sub module "r128"
(II) LoadModule: "r128"
(II) Reloading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xea002000 - 0xea002fff (0x1000) MX[B]
[6] -1 0 0xea000000 - 0xea0000ff (0x100) MX[B]
[7] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[8] -1 0 0xe9000000 - 0xe9003fff (0x4000) MX[B](B)
[9] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[10] -1 0 0xea001000 - 0xea001fff (0x1000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[14] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[15] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[16] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[17] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[18] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xea002000 - 0xea002fff (0x1000) MX[B]
[6] -1 0 0xea000000 - 0xea0000ff (0x100) MX[B]
[7] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[8] -1 0 0xe9000000 - 0xe9003fff (0x4000) MX[B](B)
[9] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[10] -1 0 0xea001000 - 0xea001fff (0x1000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[17] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[18] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[19] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[21] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
[22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) R128(0): PCI bus 1 card 0 func 0
(**) R128(0): Depth 24, (--) framebuffer bpp 32
(II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(**) R128(0): Option "AGPMode" "1"
(**) R128(0): Option "UseCCEfor2D" "false"
(==) R128(0): RGB weight 888
(II) R128(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) R128(0): initializing int10
(II) R128(0): Primary V_BIOS segment is: 0xc000
(--) R128(0): Chipset: "ATI Rage 128 RF (AGP)" (ChipID = 0x5246)
(--) R128(0): Linear framebuffer at 0xe4000000
(--) R128(0): MMIO registers at 0xe9000000
(II) R128(0): Video RAM override, using 32768 kB instead of 32768 kB
(**) R128(0): VideoRAM: 32768 kByte (128-bit SDR SGRAM 1:1)
(II) R128(0): PLL parameters: rf=2950 rd=65 min=12500 max=25000; xclk=10300
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) R128(0): VESA BIOS detected
(II) R128(0): VESA VBE Version 2.0
(II) R128(0): VESA VBE Total Mem: 32768 kB
(II) R128(0): VESA VBE OEM: ATI RAGE128
(II) R128(0): VESA VBE OEM Software Rev: 1.0
(II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) R128(0): VESA VBE OEM Product: R128
(II) R128(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) R128(0): VESA VBE DDC supported
(II) R128(0): VESA VBE DDC Level 2
(II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
(II) R128(0): VESA VBE DDC read successfully
(II) R128(0): Manufacturer: PHL Model: 1200 Serial#: 50524
(II) R128(0): Year: 1995 Week: 52
(II) R128(0): EDID Version: 1.0
(II) R128(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) R128(0): Sync: Separate Composite SyncOnGreen
(II) R128(0): Max H-Image Size [cm]: horiz.: 26 vert.: 20
(II) R128(0): Gamma: 2.25
(II) R128(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) R128(0): redX: 0.618 redY: 0.350 greenX: 0.280 greenY: 0.605
(II) R128(0): blueX: 0.152 blueY: 0.063 whiteX: 0.281 whiteY: 0.311
(II) R128(0): Supported VESA Video Modes:
(II) R128(0): 640x480@60Hz
(II) R128(0): 640x480@67Hz
(II) R128(0): 640x480@75Hz
(II) R128(0): 800x600@56Hz
(II) R128(0): 800x600@72Hz
(II) R128(0): 800x600@75Hz
(II) R128(0): 832x624@75Hz
(II) R128(0): 1024x768@87Hz (interlaced)
(II) R128(0): 1024x768@60Hz
(II) R128(0): 1024x768@70Hz
(II) R128(0): 1024x768@75Hz
(II) R128(0): Manufacturer's mask: 0
(II) R128(0): Supported Future Video Modes:
(II) R128(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) R128(0): Supported additional Video Mode:
(II) R128(0): clock: 25.2 MHz Image Size: 260 x 195 mm
(II) R128(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
(II) R128(0): v_active: 400 v_sync: 412 v_sync_end 414 v_blanking: 449 v_border: 0
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) R128(0): Philips 15A: Using hsync range of 30.00-66.00 kHz
(II) R128(0): Philips 15A: Using vrefresh range of 50.00-110.00 Hz
(II) R128(0): Clock range: 12.50 to 250.00 MHz
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1856x1392" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1440" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(--) R128(0): Virtual size is 1280x1024 (pitch 1280)
(**) R128(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) R128(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
+hsync +vsync
(**) R128(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) R128(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync
+vsync
(++) R128(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(**) R128(0): Using AGP 1x mode
Symbol fbdevHWGetLineLength from module /usr/X11R6/lib/modules/drivers/r128_drv.o is
unresolved!
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe9000000 - 0xe9003fff (0x4000) MS[B]
[1] 0 0 0xe4000000 - 0xe7ffffff (0x4000000) MS[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xea002000 - 0xea002fff (0x1000) MX[B]
[8] -1 0 0xea000000 - 0xea0000ff (0x100) MX[B]
[9] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[10] -1 0 0xe9000000 - 0xe9003fff (0x4000) MX[B](B)
[11] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[12] -1 0 0xea001000 - 0xea001fff (0x1000) MX[B](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[16] 0 0 0x0000d000 - 0x0000d0ff (0x100) IS[B]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[20] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[21] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[22] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[23] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[24] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
[25] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[26] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(==) R128(0): Write-combining range (0xe4000000,0x2000000)
(II) R128(0): [drm] created "r128" driver at busid "PCI:1:0:0"
(II) R128(0): [drm] added 4096 byte SAREA at 0xf88ba000
(II) R128(0): [drm] mapped SAREA 0xf88ba000 to 0x40014000
(II) R128(0): [drm] framebuffer handle = 0xe4000000
(II) R128(0): [drm] added 1 reserved context for kernel
(WW) R128(0): [agp] AGP not available
(WW) R128(0): [agp] AGP failed to initialize -- falling back to PCI mode.
(WW) R128(0): [agp] Make sure you have the agpgart kernel module loaded.
(II) R128(0): [pci] 8192 kB allocated with handle 0xfa8bd000
(II) R128(0): [pci] ring handle = 0xfa8bd000
(II) R128(0): [pci] Ring mapped at 0x42210000
(II) R128(0): [pci] Ring contents 0x00000000
(II) R128(0): [pci] ring read ptr handle = 0xfa9be000
(II) R128(0): [pci] Ring read ptr mapped at 0x40015000
(II) R128(0): [pci] Ring read ptr contents 0x00000000
(II) R128(0): [pci] vertex/indirect buffers handle = 0xfa9bf000
(II) R128(0): [pci] Vertex/indirect buffers mapped at 0x42311000
(II) R128(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) R128(0): [drm] register handle = 0xe9000000
(II) R128(0): [dri] Visual configs initialized
(II) R128(0): CCE in BM mode
(II) R128(0): Using 8 MB AGP aperture
(II) R128(0): Using 1 MB for the ring buffer
(II) R128(0): Using 2 MB for vertex/indirect buffers
(II) R128(0): Using 5 MB for AGP textures
(II) R128(0): Memory manager initialized to (0,0) (1280,4096)
(II) R128(0): Reserved area from (0,1024) to (1280,1026)
(II) R128(0): Largest offscreen area available: 1280 x 3070
(II) R128(0): Reserved back buffer from (0,1026) to (1280,2050)
(II) R128(0): Reserved depth buffer from (0,2050) to (1280,3075)
(II) R128(0): Reserved depth span from (0,3074) offset 0xf02800
(II) R128(0): Reserved 12288 kb for textures at offset 0x1400000
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
9 256x256 slots
(II) R128(0): Acceleration enabled
(II) R128(0): Using hardware cursor (scanline 12300)
(II) R128(0): Largest offscreen area available: 1280 x 1019
(**) Option "dpms"
(**) R128(0): DPMS enabled
(II) R128(0): X context handle = 0x00000001
(II) R128(0): [drm] installed DRM signal handler
(II) R128(0): [DRI] installation complete
(II) R128(0): [drm] Added 128 16384 byte vertex/indirect buffers
(II) R128(0): [drm] Mapped 128 vertex/indirect buffers
(II) R128(0): Direct rendering enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
PEXExtensionInit: Couldn't open default PEX font file Roman_M
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/gpmdata"
(**) Option "Buttons" "5"
(**) Mouse1: Buttons: 5
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) R128(0): [drm] removed 1 reserved context for kernel
(II) R128(0): [drm] unmapping 4096 bytes of SAREA 0xf88ba000 at 0x40014000
