>At 3/17/99 07:58 PM -0800, Shanta McBain wrote: >>Jay Barbee wrote: >>> First modem is MultiTech ZDX 19.2k bps and the second is a USR Courier >>> v.everything 33.6k bps. >>Are they set to different settings. If they are on the same setting you will >>get >>nothing. > Hummm, are you talking about the modem's config, or minicom/ppp config. I am using the same software configuration, but I am leaving the hardware as default. > >>> I figured pretty standard modems. I was using the USR on a NT with all the >>> same cables, so I know the cable and modem do work. >>> >> >>You could try wvdial it detects modem setting on installation. > I installed the package and it did not find the modem. How could this be? Here is how the config looked:
--[SNIP]-- Scanning your serial ports for a modem. Port Scan<*1>: Ignoring ttyS0 because /dev/mouse is a link to it. Port Scan<*1>: S1 ttyS2<*1>: AT -- AT -- AT -- nothing. ttyS3<*1>: AT -- AT -- AT -- nothing. Sorry, no modem was detected! --[SNIP]-- Are these ports just not working? I know the modem and cable work fine on another system. --Jay Barbee
