OK, I put that line in my lilo.conf file. When I tried to mount /dev/sr0, it mounted my cd-rom drive; I couldn't mount my cd-rw with sr0, sr1, or scd0, or scd1. So I unselected the scsi cdrom option in menuconfig. Thus, only scsi emulation and generic scsi were selected. At boot it appeared to recognize both the cdrom and the cd-rw. However, I cannot mount anything. Thanks...
NatePuri Certified Law Student & Debian GNU/Linux Monk McGeorge School of Law [EMAIL PROTECTED] http://ompages.com On Sat, 27 Feb 1999, Steve Beitzel wrote: > Hey Guys, > > Make sure you have the line: > > append="hdX=ide-scsi" > > in your lilo.conf, where X is the letter of the device your CD-RW is on > the IDE bus , e.g. > > hda = primary master > hdb = primary slave > hdc = secondary master > hdd = secondary slave > > If you have other problems, let me know and I will try to help. > > Good Luck, > > /\ > / \ > / \ > / /\/\ \ > / \ Steve Beitzel > / /\ /\ \ [EMAIL PROTECTED] > / \/ \/ \ http://diamondman.dyn.ez-ip.net/~diamond > / /\ \ ICQ#: 19510745 > \ \/ / > \ ___ / > \ /___\ / > \ \___/ / > \ / > \ / > \ / > \/ > > On Sat, 27 Feb 1999, Vaidhyanathan G Mayilrangam wrote: > > > Can you please send me your log when you boot up. I want to know if the > > kernel identified your cd-rw. > > > > Also look at your /proc/scsi. The file /proc/scsi/scsi should have > > something like this : > > Attached devices: > > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > > Vendor: HP Model: CD-Writer+ 8100 Rev: 1.0g > > Type: CD-ROM ANSI SCSI revision: 02 > > > > If you have it , it means that the kernel identified it right. If not, your > > kernel config is wrong. Also can yopu send me your kernel configuration > > file. > > > > I will look at it. > > > > Regards, > > Vaidhy > > > > > > On Sat, Feb 27, 1999 at 02:35:59PM -0800, Paul Nathan Puri wrote: > > > I'm still trying to install CD-RW, an HP IDE version. I've compiled the > > > scsi emulation, scsi cd-rom. ./MAKEDEV sg-all, it won't do ./MAKEDEV sr. > > > I can't mount /dev/scd0, /dev/sr0, or dev/sg0. I really want to make this > > > ide cd writer work. Thanks... > > > > > > NatePuri > > > Certified Law Student > > > & Debian GNU/Linux Monk > > > McGeorge School of Law > > > [EMAIL PROTECTED] > > > http://ompages.com > > > > > > > > > > > > -- > > > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null > > > > > > > > > -- > > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null > > > > > > > -- > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null > >
