Hey Guys,
Make sure you have the line:
append="hdX=ide-scsi"
in your lilo.conf, where X is the letter of the device your CD-RW is on
the IDE bus , e.g.
hda = primary master
hdb = primary slave
hdc = secondary master
hdd = secondary slave
If you have other problems, let me know and I will try to help.
Good Luck,
/\
/ \
/ \
/ /\/\ \
/ \ Steve Beitzel
/ /\ /\ \ [EMAIL PROTECTED]
/ \/ \/ \ http://diamondman.dyn.ez-ip.net/~diamond
/ /\ \ ICQ#: 19510745
\ \/ /
\ ___ /
\ /___\ /
\ \___/ /
\ /
\ /
\ /
\/
On Sat, 27 Feb 1999, Vaidhyanathan G Mayilrangam wrote:
> Can you please send me your log when you boot up. I want to know if the
> kernel identified your cd-rw.
>
> Also look at your /proc/scsi. The file /proc/scsi/scsi should have something
> like this :
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: HP Model: CD-Writer+ 8100 Rev: 1.0g
> Type: CD-ROM ANSI SCSI revision: 02
>
> If you have it , it means that the kernel identified it right. If not, your
> kernel config is wrong. Also can yopu send me your kernel configuration file.
>
> I will look at it.
>
> Regards,
> Vaidhy
>
>
> On Sat, Feb 27, 1999 at 02:35:59PM -0800, Paul Nathan Puri wrote:
> > I'm still trying to install CD-RW, an HP IDE version. I've compiled the
> > scsi emulation, scsi cd-rom. ./MAKEDEV sg-all, it won't do ./MAKEDEV sr.
> > I can't mount /dev/scd0, /dev/sr0, or dev/sg0. I really want to make this
> > ide cd writer work. Thanks...
> >
> > NatePuri
> > Certified Law Student
> > & Debian GNU/Linux Monk
> > McGeorge School of Law
> > [EMAIL PROTECTED]
> > http://ompages.com
> >
> >
> >
> > --
> > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
> >
>
>
> --
> Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
>
>
