I plugged in my other laptop using the same pcmcia NIC and wire. Same amount of packet loss.
Do I conclude that it's either my hub or the wires? Thanks NatePuri Jay Barbee wrote: > > Paul, > > Have your tried to plug another system on this endpoint to verify that is > it not wiring or a bad port form the hub? It would just be a quick check > to make sure you are not spinning your wheels on the IRQ problem. You > could have a bad cable or be out of range. At any rate, just my $.02. > > Good Luck, > --Jay Barbee > > At 2/14/99 05:31 AM +0000, Paul Nathan Puri wrote: > >Yes, it is on of these 3Com hubs. > > > >The Port status section of the leds remains light on the 100 > >section for both cards. > > > >The Network Utilization section of the hub leds consistently > >blinks, on the 1% led of the 100 section; after every 13th > >blink, both the 100 and the 10 blink together. > > > >Does this tell you anything? > > > >Thanks. Hows the weather in Finland? In Sacramento, > >California it wet and cloudy. C-ya. > > -- NatePuri Certified Law Student & Debian GNU/Linux Monk McGeorge School of Law [EMAIL PROTECTED] http://ompages.com Receive my PGP Public Key from http://www.pgp.com/
