yes i'm sure it's a winmodem Jens B. Jorgensen wrote:
> Well, now I know what the problem is. Linux does not support the > Winmodem > because it doesn't work like most modems, but has a proprietary > interface. > Are you sure it's a winmodem? > > Lily wrote: > > > well, i'm back again !!! > > I have reinstalled PPP and now when i make : `dmesg | grep PPP`, > i've > > got a message which indicates me that i have ppp. > > i've tried to connect with /dev/ttyS3 but it doesn't work... > > can you tell me what is the command line to get to connect ? > > the one i use is : > > pppd /dev/ttyS3 38400 `chat -v "" ATDT <phone> CONNECT "" ogin: > <login> > > word: <password>` -detach debug crtscts modem defaultroute 0.0.0.0: > > where 0.0.0.0 is my ip adress( it is not this one, it's an example) > > one thing, i've got a USR Sportster Winmodem 33.6 PC, does is work > under > > Linux ? > > > > Jens B. Jorgensen wrote: > > > > > Ok, if your modem is com4 under windows then in Linux it should be > > > > /dev/ttyS3. The process ppp is all-lowercase, so your grep command > > > > below > > > wouldn't find it. Are you using xisp or something similar to > control > > > dialup? > > > > > > Lily wrote: > > > > > > > Ok !!! but i've tried with it... all i know is that my modem is > on > > > com 4 > > > > under windows > > > > what would it be under Linux... > > > > and when i do `dmesg | grep PPP` there is nothing although i > have > > > > installed ppp and recompiled the kernel of Linux, make the > modules > > > and > > > > install it... > > > > So, what can i do more precisly ?? > > > > > > > > Jens B. Jorgensen wrote: > > > > > > > > > The 'cuaX' naming convention for serial devices is deprecated. > Now > > > > > > > > serial > > > > > devices are named like /dev/ttyS0, /dev/ttyS1, etc. Good luck. > > > > > > > > > > > Lily wrote: > > > > > > > > > > > Hello, i'm Lily(nickname) !!! > > > > > > my problem is that i want to have internet under Linux but i > > > > don't > > > > > have > > > > > > '/dev/cua?' . > > > > > > How can i do to have these ( i have already try with MAKEDEV > but > > > > > > > > > nothing) ?? > > > > > > thanks for all... > > > > > > > > > > -- > > > > > Jens B. Jorgensen > > > > > [EMAIL PROTECTED] > > > > > > -- > > > Jens B. Jorgensen > > > [EMAIL PROTECTED] > > -- > Jens B. Jorgensen > [EMAIL PROTECTED] -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
